Siemens SIMOTION C230-2 Equipment Manual page 50

Device Data
Table 3-14 Summary of LED displays, continued
Function Function
Fault to which the user program
cannot respond.
The following actions may be re-
quired to rectify the fault:
S
Power off/on
S
Check Micro Memory Card
S
New commissioning procedure
S
Replace the C230-2
No license exists for technology/op-
tional objects under license
PROFIBUS DP interface as slave
Bus fault
Searching for baud rate
Parameterization error
No cyclic data exchange
Cyclic data exchange
PROFIBUS P interface as master
Bus fault (bus short-circuit)
Bus fault (slaves have failed or
cable faulty)
No fault or no interface configured
3-50
SF 5 VDC RUN
(red) (green) (green)
x 1 x
0.5/1 1 x
x 1 x
x 1 x
x 1 x
x 1 x
x 1 x
x 1 x
LED display
STOPU STOP BUS1F
(yellow) (yellow) (red)
l l l
x x x
x x 1
x x 0.5/1
x x 0
x x 1
x x 0.5/1
x x 0
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
BUS2F
(red)
l
x
1
0.5/1
0
1
0.5/1
0