Siemens SIMOTION C230-2 Equipment Manual page 142

EC Declaration of Conformity
Appendix A to EC declaration of conformity No. E002
A21: Typical system configuration
SIMOTION C230 and C230-2/SIMODRIVE 611 with closed-loop control 611 U
Metal cabinet
SIMOTION
PS
307
C230
SIMODRIVE
Fil–
611with
ter
Control
2)
611 U
1)
Choke coil
Mains terminal
1)
For I/RF module and UE module, 28kW
2) Filter in module assembly or separate
3) If SIMOTION C230/C230-2 and replacement components are used, it is also permissible
for the components to be mounted outside the cabinet. (Cable length between cabinet and
external components < 3 m.)
S
All components that are indicated in the order documentation as being approved for use with
SIMOTION C230/C230-2 comply with the Directive 89/336/EEC when they are used in this
combination.
S
See Appendix C for information on compliance with Standards.
Note:
Only the basic measures for compliance with the Directive 89/336/EEC as they apply to a typi-
cal system configuration are shown in the sketch.
In addition and in particular when deviating from this system configuration, please note the
installation instructions for correct system installation to comply with EMC criteria, as detailed in
the product documentation and the EMC installation guidelines for SINUMERIK; SIROTEC,
SIMODRIVE (Order No.: 6FC 5297-0AD30-0APV).
B-142
To
operator
panel
SM
SM
3)
322 374
-2
To SIM. 611
Operator
panel
Alternative layout:
SIMOTION
PS
C230
307
l < 3 m
l < 3 m
Digital inputs/outputs
Machine base
M
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
SM
SM
3)
374
-2 322
Digital inputs/outputs
TG