Changing Or Deleting Passwords - Olivetti OFX 2100 Instruction Manual

CHANGING OR DELETING PASSWORDS

You can change or delete a password that has been set.
This section explains how to change or delete the transmission password.
To change or delete the configuration password: follow steps 1 and 2 of the procedure described below, enter
the current password, press the ∨ ∨ or ∧ ∧ key to select the "config. password" function and press START to
confirm the selection made. At this point you can change the password by typing a new sequence of four
alphanumeric characters (max.)and pressing SET/CONF. or delete it simply by pressing CLEAR.
o
The facsimile machine is on. A transmission password has been set. There is no document in the ADF.
1. Press FUNCTION followed by 5.
2. Press START to access the menu.
Press the ∨ ∨ key to select the "Transmission password"
3.
function.
4. Press START to confirm the selection made.
5. Type the current password (see the example given in
the previous section).
6. To confirm the password set, press SET/CONF.
You now have the following options:
Change the current password, by typing a new sequence
of four alphanumeric characters (max.) and pressing
SET/CONF , or:
cap06.p65 35
PROGRAMMING
F U N C T I O N
5 : D A T A E N T R Y
D A T A E N T R Y
D A T E / T I M E
D A T A E N T R Y
T X P A S S W O R D
C U R R E N T :
A
C U R R E N T :
g
P o n g
N E W :
13/04/00, 22.20
A
+
35