Table of Contents
Advertisement
PROGRAMMING
The one-touch dialling key and speed dialling code data is printed:
-
in ascending numeric order, if a name has not been associated with the facsimile machine.
-
in alphabetical order, if the corresponding key has been associated with the correspondent's name as well
as the facsimile number.
If any of the parameters have not been programmed, this is indicated by "—" on the display. If the key or code
has not been programmed at all, it will not be printed.
This section explains how to print out the data and provides a practical example.
o
The facsimile machine is on. There is no document in the ADF. One-touch dialling keys and speed dialling
codes have been programmed.
1.
Follow the procedure described in steps 1 and 2 of the
"PROGRAMMING ONE-TOUCH DIALLING KEYS"
section or the procedure described in steps 1 to 3 of
the "PROGRAMMING SPEED DIALLING CODES"
sections.
Example: follow the procedure described in steps 1
to 3 of the "PROGRAMMING SPEED DIALLING
CODES" section.
2.
Press 3. All the data programmed for coded speed
dialling is printed.
3.
Press STOP to quit the menu.
Printing may be interrupted by pressing the STOP
key.
Example of a printout of the data programmed under the speed dialling codes.
28
cap05.p65
28
P H O N E B O O K
S P E E D D I A L I N G
13/04/00, 22.17
Advertisement
Table of Contents
