Setting Operating Configuration Parameters - Olivetti OFX 2100 Instruction Manual

PROGRAMMING

SETTING OPERATING CONFIGURATION PARAMETERS

You can control some of the facsimile machine's functions by setting operating configuration parameters which
concern, for example, automatic printing of the activity report, transmission report and reception report,
transmission inhibition, etc.
To have an overall view of the operating configuration parameters initially set on the facsimile machine, consult
the table at the end of this section or see the description of key 6 in the "GETTING TO KNOW THE FACSIMILE
MACHINE" chapter.
At the time of installation, these parameters are already set with initial values. To select and change the
parameters displayed by the facsimile machine, follow the procedure described below.
o
The facsimile machine is on. There is no document in the ADF.
1. Press FUNCTION followed by 6.
2. Press START to access the menu.
Press ∨ ∨ or ∧ ∧ to select the parameter that you want
3.
to program.
Example: select the "LAST TX REPORT" parameter
4. Press START to confirm the parameter selected.
The display shows the current value of the parameter
selected.
5. Press SET/CONF . to confirm the value displayed or:
press ∨ ∨ or ∧ ∧ to select the alternative value and
then press SET/CONF . to confirm.
The facsimile machine is automatically set for
programming the next parameter.
40
cap07.p65 40
F U N C T I O N
6 : C O N F I G U R A T I O N
C O N F I G U R A T I O N
E C M
C O N F I G U R A T I O N
L A S T T X R E P O R T
L A S T T X R E P O R T
N O
C O N F I G U R A T I O N
R X R E P O R T
13/04/00, 22.23
+