Table of Contents
Advertisement
PROGRAMMING
4.
Press START to start setting the password ( max. 4
alphanumeric characters).
Each character is entered by pressing the ∨ ∨ or ∧ ∧ key
to scroll through the entire set of alphanumeric
characters until the desired character is displayed
and then by pressing the > key to confirm selection.
The character selected appears in the top right-hand
corner. (For a complete list of the alphaumeric
characters available, refer to the "CHARACTER SET
TABLE" chapter).
If you make a typing error, press CLEAR and repeat
the entire entry procedure.
5.
To confirm the password set, press SET/CONF.
The display shows the next function on the menu.
Having set the transmission password, the facsimile
machine is automatically set for programming the
next function ("Storing the config. password").
Repeat the procedure from step 4, if you want to set
the config. password, or:
press STOP twice to quit the menu.
34
cap06.p65
34
N E W :
N E W :
P o n g
D A T A E N T R Y
C O N F I G . P A S S W O R D
13/04/00, 22.20
A
g
Advertisement
Table of Contents
