Programming One-Touch Dial And Speed Dialling; One-Touch Dial - Olivetti OFX 550 Instructions Manual

In the "TAD FAX/RX" reception mode, in some countries,
you can also access the service for the recognition of the
dial tone frequency. See chapter "For a more sophisti-
cated use".
Either way, in this reception mode, the behaviour of
your fax machine depends on the caller, as shown in
the next diagram:
After the number of
The remote party who called listens to the prerecorded
message on the answering machine
If a FAX
MACHINE called.
Your fax machine
is automatically
set for reception.
-3-13-31.p65
rings of the answering machine
If a remote party If a remote party
called to send a called to talk.
fax.
The remote party The remote party
presses the trans- leaves a mes-
mission start key. sage after the
beep.
Your fax machine
is automatically
set for reception.
23
PROGRAMMING ONE-TOUCH DIAL AND
SPEED DIALLING ...
As illustrated in "Particular dialling cases", you can
program the fax machine to carry out the following rapid
dialling procedures:
•

One-touch dial

• Speed dialling
One-touch dial...
You can associate a fax number, a name and a tel-
ephone number to each of the 10 one-touch dial nu-
meric keys (0 - 9). The number/name stored will be
selected automatically when you press the correspond-
ing key.
Associating a fax number:
Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Press the FUNCTION
key until the display
shows --->
3 Press the START key.
4 Press the FUNCTION
key until the display
shows --->
5 Press the START key.
6 Press the one-touch
dial numeric key to
which you want to link
a fax number (e.g. 1).
7 Press the START key.
If a fax number has already been stored under this key,
it will be displayed.
02/04/01, 9.19
DISPLAY
AUTOMATIC RX
26-03-99 17:45
FAX SET-UP
DATE AND TIME
ONE TOUCH DIAL
TYPE ONE TOUCH
KEY: 0-9
FAX NO.
1: FAX NO.
_
23