Table of Contents
Advertisement
AUTOMATIC SHEET FEEDER ADJUSTMENT
The automatic sheet feeder (ASF) may be adjusted in accordance with the paper size to be used. The
feeder is supplied preset to use A4 paper (210 mm x 297 mm) but may be modified to use US Letter (216
x 272 mm) and US Legal (216 x 349 mm) sizes.
When you load paper for the printing of received and copied documents, it is important that you pay
attention to the following three factors, that must always correspond to guarantee correct functioning of the
fax:
•
The format of the paper, that is the width of the paper being used.
•
The format of the feeder cassette, that is the distance between the internal sides.
•
The printing format, that is the value of the SIZE parameter in the PRINTER PARAMET. menu.
1.
Remove the paper feeder cassette.
2.
Remove the feeder cover by levering it up with a coin
inserted in one of its side supports (A). Disengage the
two internal sides at the bottom using the coin (B) and
position them in conformity with the paper size you
intend to use: on the inner guides (1) for A4 and on the
outer guides (2) for US LETTER and LEGAL sizes.
3.
Refit the cover and insert the sheet feeder in its housing;
flip open the cover and insert sheets of the required size
(max. 70).
4.
Close the cover.
114
A
B
ROUTINE MAINTENANCE
Advertisement
Table of Contents
