Programming Chart And Description Of The Sub-Menu: Print Install - Olivetti OFX 1000 Instruction Manual

START: Confirms selection of the sub-menu and moves down to the associated parameters. Confirms a
parameter and the relative value and moves on to the next parameter.
< / > : To select the value of a parameter by scrolling forward and backward through the values
available. Alternatively used to position on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.
STOP: Interrupts the programming procedure and returns to the original operating mode display.
DESCRIPTION:
a) This parameter allows you to enable or disable telediagnostic testing from a remote terminal. In more
simple terms, this allows the user to choose whether to authorise remote monitoring of his/her fax
machine. If this function is enabled (ON), the remote terminal can interrogate the fax machine, receive
information about its operation and change its settings.
More specifically, the remote terminal can:
set the fax machine's installation parameters
The remote terminal displays the fax machine's installation parameters in order to check and, if
necessary, modify the parameter values.
perform diagnostic testing
the remote terminal monitors information concerning configuration parameters, the last journal and
transactional statistics (connection conditions, errors detected, number of pages transmitted and
received etc.). Analysis of these data allows the remote terminal to modify the value of certain
parameters if required by remote control in order to guarantee the optimum performance of your fax
machine.
b) The parameter also provides line monitor selection. If the line monitor function is selected, the user will
be able to monitor the signals exchanged between the local and remote fax machines during the initial
connection phase.

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: PRINT INSTALL.

START: Confirms selection of the sub-menu and moves down to the associated parameters. Confirms a
parameter and the relative value and moves on to the next parameter.
< / > : To select the value of a parameter by scrolling forward and backward through the values
available. Alternatively used to position on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.
STOP: Interrupts the programming procedure and returns to the original operating mode display.
DESCRIPTION:
a) This parameter allows you to print out a list of the parameter settings. By printing the parameter
settings you can make a global check on the relative values. Selecting "EXIT" allows you to exit this
function without printing to pass to the next sub-menu.
46
PRINT INSTALL.
PRINT OUT: START
a)
Ø
PRINT OUT: EXIT
INSTALLATION PARAMETERS