Warm Reset; Backup And Restore - Nortel Enterprise Edge 2.0 Programming Manual

260 Maintenance
Each region has a Market Profile associated with it. For more information on
Market Profiles, refer to
Note: When you select a new region, the Template list is read-only. It is only
after the system is restarted that the available templates for this region
are displayed.
4. Type any valid value in the start dn box. The box displays the current value.
5. Click OK to apply these changes.
The system displays a warning that the system will restart and default
programming values will be restored.
Note: After the system's cold start is completed, you can use a different
template than the default template. From Diagnostics, MSC, System
startup and select a template from the template list. However, if you
select a new template, you must perform another system restart.

Warm reset

A warm reset restores the system but does not affect the current telephony
programming.
1. Choose Diagnostics, MSC. The Configuration menu option is enabled.
2. Access the Configuration menu and click Warm reset.
The system displays a warning that all active calls will be dropped.
3. Click OK to continue.

Backup and restore

There are two modes of backup and restore on the Enterprise Edge system; the BRU
utility and the Backup and Restore tools which you access through Unified
Manager.
The BRU utility manages local, remote and Web-enabled Enterprise Edge software.
BRU works with .xml script files to perform step-by-step backup, restore or upgrade
of the full Enterprise Edge system or selected components. After you select the
needed components, BRU creates a ready-to-run Windows NT script file which
BRU can execute immediately or at a repeatable scheduled time and date.
Unified Manager's Backup and Restore tools allow you to back up your telephony
programming or retrieve a complete copy of telephony programming information
to restore on the Enterprise Edge system.
For more information on backing up and restoring your Enterprise Edge system
programming, refer to the following:
Enterprise Edge 2.0 Programming Operations Guide
Appendix D: Market profile attributes on page 391.
P0911588 Issue 01