Wan Ppp Parameters - Nortel Enterprise Edge 2.0 Programming Manual

5. In the Committed Burst BC (kbits) box, type the committed burst in kbits.
6. In the Excess Burst BE (kbits) box, type the excess burst in kbits.
7. Click the Save button to save the entries.
To modify a PVC congestion control entry:
1. Select the entry you want to modify in the PVC Congestion Control table
2. On the menu, click Configuration, and then click Modify PVC Congestion
Control.
The PVC Congestion Control dialog box appears.
Note: If you have not selected a PVC Congestion Control entry, an error
message appears saying "Please select a row in the Table".
3. Click any box that requires modification and make the changes.
4. Click the Save button to save the modifications.
To delete a PVC congestion control entry:
1. Click the entry you want to delete in the PVC Congestion Control table.
2. On the menu, click Configuration, and then click Delete PVC Congestion
Control.
A message prompts you to confirm the deletion.
Note: If you have not selected a PVC Congestion Control entry, an error
message appears saying "Please select a row in the Table".
3. Click the Yes button to delete the PVC congestion control entry.

WAN PPP Parameters

If you chose PPP as your link protocol, set the WAN PPP Parameters screen.
1. Use the following table to set the WAN PPP parameters:
Attribute
LCP Keep Alive
Interval
LQR Interval
Allowed Authentication Lets you specify if a remote user can use PAP or CHAP or if the remote
P0911588 Issue 01
Configuring Enterprise Edge Resources 57
Description
Lets you define at which interval, in seconds, to send a keep alive signal
when there is no regular traffic on the PPP link.
The default value is 10.
Lets you define at which interval, in 1/100 second, to perform link
quality monitoring.
user is restricted to use CHAP only.
Enterprise Edge 2.0 Programming Operations Guide