Feature Settings - Nortel Enterprise Edge 2.0 Programming Manual

148 Configuring Enterprise Edge Services
Change DNs
Change DNs allows you to change the directory number (DN) or internal number
of a telephone in the Change DNs dialog box.
1. Choose Services, Telephony Services, and then click on the General settings
heading.
2. On the Configuration menu, click Change DNs.
The Change DNs dialog box appears.
3. In the Old DN box type the DN you want to change.
4. In the New DN box type the new DN.
5. Click OK.
Note: To change the start DN for your system see
the Maintenance chapter.

Feature settings

The Feature settings attribute allows you to program a number of features that apply
to all telephones connected to Enterprise Edge.
To configure Feature settings:
1. Choose Services, Telephony Services, General settings, Feature settings.
2. Configure Feature settings according to the table:
Attribute
Background music Allows you to listen to music through your telephone speaker. A music
On hold
Enterprise Edge 2.0 Programming Operations Guide
Changing DN locks programming session.
Changing an individual DN locks the programming session into the Change
DNs programming mode. To unlock the programming session, exit and restart
Unified Manager.
Description
source must be connected to Enterprise Edge.
Values: Y or N (Default: N)
Allows you to choose what a caller hears on an external line when the
line is put on hold. Tones provides a periodic tone. Music provides any
signal from a source such as a radio connected to Enterprise Edge.
Silence provides no audio feedback.
Values: Tones, Music, Silence (Default: Tones)
System startup on page 259 of
P0911588 Issue 01