User Preferences - Nortel Enterprise Edge 2.0 Programming Manual

102 Configuring Enterprise Edge Services

User preferences

The User preferences settings allow you to do the same programming that users can
do at their telephones. If the attached set is not an Enterprise Edge set, these options
are not available.
To configure User preferences settings:
1. Choose Services, Telephony Services, Terminals & sets.
2. Click the telephone set (DN 221-528).
3. Click on the User preferences heading.
4. Configure User preferences settings according to the table:
Setting
Model
Call log options
Dialing options
Language
Contrast
Ring type
Button programming
The Button programming heading allows you to program the telephone buttons
with internal and external autodialers and programmed feature keys.
1. Click on the key to expand the User preferences heading.
2. Click on the Button programming heading.
The list of available buttons expands.
3. Click on the button you want to program.
4. In the Type box, choose External autodial, Feature, Blank, or Internal
autodial.
5. Press Enter to refresh the screen.
Enterprise Edge 2.0 Programming Operations Guide
Description
Pre-program the model of Enterprise Edge set that will use this DN
(M7310). You cannot change the model if the set is already attached.
Select whether the set will:
Log all calls, No autologging, No one answered or Unanswered by
me.
Select Standard dial, Pre-dial or Automatic dial.
Choose the display language: English, French or Spanish.
Adjust the contrast of the display 1, 2, 3,4, 5.....9
Select a ring type 1, 2, 3, 4
P0911588 Issue 01