Removal Of Electrical Box - Daikin FTXS09DVJU Service Manual

SiUS04-702
3.2 Removal of
Procedure
Step
Remove the top panel.
Disconnect the connector
for fan motor.
1. Remove the electrical
box.
1 Disconnect the 2
reactor harnesses.
2 Disconnect the relay
connector for
compressor lead wire.
3 Disconnect the
connector for four way
valve (S80).
Removal Procedure
Electrical Box
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
RX09/12FVJU
Points
When reassembling, coil the
excessive lead wire and
hang the loop on the hook.
237