Removal Of Electrical Box, Pcb And Swing Motor - Daikin FTXS09DVJU Service Manual

FTXS09/12DVJU
1.4 Removal of
Procedure
Step
Remove front grill.
1. Remove electrical box.
Disconnect the
1
connection wires.
Disconnect connectors
2
(S1 and S7) of fan
motor.
3 Disconnect one
connector (S6) of
motor.
4 Remove heat
exchanger thermistor.
190
Electrical Box, PCB
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
swing
and Swing Motor
Pay attention to the direction
of the retainer of the
thermistor so that the
retainer will not touch the
harness (same as the
existing models.)
SiUS04-702
Points
Removal Procedure