Removal Of Electrical Box - Daikin J Series Service Manual

SiBE041101
1.5

Removal of Electrical Box

Procedure
Step
The figure shows the
1
connections of wire
harnesses.
2 Remove the screw of
the wire fixture.
3 Remove the screws on
the terminal board to
disconnect the
connecting wires.
4 Disconnect the
connector for fan motor
[S1].
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
[S1]
Electrical box
(R7931)
Wire
fixture
(R7932)
Terminal
board
Connecting
wires
(R7933)
(R7934)
Indoor Unit
Points
Preparation
Remove the front grille
according to the "Removal
of Front Grille".
144