Table of Contents
Advertisement
NOTE: An E-Stop jumper or a user-supplied E-Stop button needs to be attached to
the E-STOP port on the User Interface connector for the platform to function. The
jumper is provided as part number 12730-000L. An E-Stop button would be user-
supplied.
NOTE: See the following figure.
14766-000 Rev E
CAUTION: If you are using a user-supplied E-Stop, you must run the Safety
Commissioning to verify the E-Stop's functionality before putting the AIV into
service.
Figure 6-10. E-Stop Jumper on Platform Core
LD Platform Cart Transporter User's Guide
Chapter 6: Connectivity
97
Advertisement
Table of Contents
