Safety Inspection; Warning Devices; Warning Labels - Omron LD-105CT User Manual

Cart transporter
Hide thumbs Also See for LD-105CT:
Table of Contents

Advertisement

10.3 Safety Inspection

Warning Devices

Warning Labels

Informative Labels
Warning Devices
The following warning devices should be inspected for proper function on a weekly basis.
Light Discs
The light discs on each side of the transporter should be checked.
Flashing Light(s)
The beacon on top of the HMI post should be checked.
If there is a user-installed beacon or light tower that has been installed to warn people of the
AIV's movement or imminent movement, it should be checked for proper function every week.
You should ensure that the light remains visible under all operating conditions, so that, regard-
less of your payload structure design, any people near the AIV can see it.
Buzzer
The warning buzzer should be checked for proper function. In order to maintain conformity
with applicable standards, it is important that the buzzer be audible in all operating con-
ditions and environments.
Warning Labels
See Figure 10-6. and Figure 10-7.
All warning labels on the LD Platform Cart Transporter should be checked on a weekly basis
for being present and legible. If any of the labels are missing or illegible, they should be
replaced. The labels, with part numbers, are:
Invisible Laser Aperture Label, 13307-000L
l
One of these labels will be on the front navigation laser.
14766-000 Rev E
Item
Period
1 week
1 week
1 week
LD Platform Cart Transporter User's Guide
Chapter 10: Maintenance
Reference
Warning Devices on page 145
Warning Labels on page 145
Informative Labels on page 148
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ld-130ct

Table of Contents