Omron LD-105CT User Manual page 41

2. Roll the transporter off of the crate base and down the ramp.
3. Remove the two wheel pins that held the wheels up during transit.
The wheels are pinned up to protect the motors and drives. When you receive your LD
Platform Cart Transporter, the drive wheels will not touch the ground until you remove
the wheel pins. The wheel pin hole is shown in the following figure.
14766-000 Rev E
Figure 3-7. LD Platform Cart Transporter on Crate Base, with Ramp
LD Platform Cart Transporter User's Guide
Chapter 3: Setup
41