Requesting An Echo Profile; Device Address (Default: 126); Auto False Echo Suppression - Siemens sitrans LR200 Instruction Manual

Requesting an Echo Profile

a) In PROGRAM mode, navigate to: LEVEL
METER > DIAGNOSTICS (3) > ECHO
PROFILE (3.2)
b) Press RIGHT Arrow
profile.
c) In the Profile screen, press UP Arrow
to select the Transmit icon, and
RIGHT Arrow
d) Press DOWN Arrow
Exit icon, then RIGHT Arrow
return to previous menu.

Device Address (default: 126)

1. Press RIGHT Arrow
2. Press DOWN Arrow
RIGHT Arrow
3. Scroll to DEVICE ADDRESS and press RIGHT Arrow
If required, press RIGHT Arrow
RIGHT Arrow
4. Press Mode

Auto False Echo Suppression

If SITRANS LR200 displays a false high level, or the reading is fluctuating between the
correct level and a false high level, you can use Auto False Echo Suppression to prevent
false echo detection. See TVT (Auto False Echo Suppression) setup (2.2.4.) on page 58 for
instructions.
Page 26 SITRANS LR200 (PROFIBUS PA) – INSTRUCTION MANUAL
to request a
to update the profile.
to select the
to
to activate PROGRAM mode and open menu level 1.
repeatedly to navigate to COMMUNICATION (5) then press
to display the parameter list.
to accept it. The LCD displays the new value in parameter view.
to return to Measurement mode.
DIAGNOSTICS
FAULT RESET
ECHO PROFILE
MEAS. VALUES
REMAIN. DEV.LIFE
C:38 A:TF D:4.25
1 2 3 4
transmit icon,
selected
to open parameter view.
to open Edit mode. Key in a new value and press
3.2
transmit
icon,
deselected
exit icon,
selected
5
exit icon,
deselected
7ML19985JR01