Maintenance; Device Status; Wear; Peak Values - Siemens sitrans LR200 Instruction Manual

Maintenance

For information on setting maintenance schedules see:
Remaining Device Lifetime (3.15.)
•
Remaining Sensor Lifetime (3.16.)
•
Service Interval (4.16.)
•
Calibration Interval (4.17.)
•

Device Status

Open the menu View – Device Status to view Device Status, Extended Diagnostics,
Maintenance, and Diagnostics status. See Diagnostics (3.) on page 68.

Wear

Reports the number of hours the device has been operating, and the number of times it
has been powered up.
Open the menu View – Wear to view:
• Powered Hours
• Power-on Resets

Peak Values

Open the menu View – Peak Values to view:
• Sensor minimum and maximum Measured Values
• Minimum and maximum Output Values for AIFB1 and AIFB2
• Minimum and maximum Internal Temperatures

Acknowledge Faults

Open the menu View – Acknowledge Faults, select the appropriate item from the
Extended Diagnostics pull-down menu, and click on Transfer.

Set Address

Open the menu Device – Set Address.
7ML19985JR01 SITRANS LR200 (PROFIBUS PA) – INSTRUCTION MANUAL
on page 73
on page 76
on page 81
on page 83.
Page 43