Front Bezel; Removing The Front Bezel - Dell 88HPH Owner's Manual

Steps
1. Place the side cover on the chassis.
2. Align the tabs on the side cover with the slots on the chassis.
3. Slide the side cover into place towards the front of the computer.
4. Tighten the thumb-screw (6x32) that secure the side cover to the chassis.
Next steps
1. Follow the procedure in

Front bezel

Removing the front bezel

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following image(s) indicate the location of the front bezel and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs) 33