Replacing The Chassis Fan; Replacing The Processor Fan And Heat Sink Assembly - Dell Studio 540 Service Manual

Back to Contents Page
Replacing Fans
Dell Studio™ 540 Service Manual
Replacing the Chassis Fan
Replacing the Processor Fan and Heat Sink Assembly
CAUTION:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
computer from the electrical outlet before removing the cover.
Replacing the Chassis Fan
NOTICE:
1 screws (4) 2 chassis fan
1. Follow the procedures in
2. Remove the computer cover (see
3. Disconnect the chassis fan cable from the system board connector (SYS_FAN1).
4. Remove the four screws securing the chassis fan.
5. Lift the chassis fan away from the computer.
6. To replace the chassis fan, slide it in place towards the back of the computer.
7. Replace the four screws to secure the chassis fan.
8. Connect the chassis fan cable to the system board connector (SYS_FAN1).
9. Replace the computer cover (see
Replacing the Processor Fan and Heat Sink Assembly
CAUTION:
time to cool before you touch it.
NOTICE:
NOTICE:
1. Follow the procedures in
2. Remove the computer cover (see
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your
Do not touch the fan blades when you are removing the chassis fan. This could damage the fan.
Before You Begin.
Replacing the Computer
Replacing the Computer
Despite having a plastic shield, the heat sink fan assembly may be very hot during normal operation. Be sure that it has had sufficient
Do not touch the fan blades when you are removing the processor fan and heat sink assembly. This could damage the fan.
The processor fan with the heat sink is one single unit. Do not try to remove the fan separately.
Before You Begin.
Replacing the Computer
UserManuals.info
Cover).
Cover).
Cover).