Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Connect the antenna cables to the wireless card.
2. Place the wireless-card bracket over the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card at an angle into the wireless-card
slot.
4. Replace the screw (M2x3.5) that secures the wireless card to the system board.
5. Place the computer in an upright position.
Post-requisites
Replace the
right-side
cover.
Replacing the wireless card
computer. After working inside your computer, follow the instructions in
Replacing the wireless card
30
After
47
Advertisement
Table of Contents
