Replacing the computer cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the tabs on the computer cover with the slots on the chassis and slide it
towards the front of the computer.
2
Replace the two screws (#6-32xL6.35) that secure the computer cover to the
chassis.
3
Place the computer in an upright position.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before
19