Device Configuration - Omron G9SP-N20S Network Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedure of this document are as
follows:
Personal computer
(Sysmac Studio installed,
OS:Windows7)
USB cable
4
Manufacturer
OMRON Serial Communications Unit
OMRON NJ-series CPU Unit
OMRON Power Supply Unit
OMRON Sysmac Studio
OMRON Sysmac Studio project file
- Personal computer
(OS: Windows 7)
- USB cable
(USB 2.0 type B connector)
- Serial Communications Cable
OMRON Safety Controller
OMRON RS-232C Option Board
OMRON Memory Cassette
OMRON Expansion I/O Unit
OMRON Expansion I/O Connecting
Cable
Precautions for Correct Use
Obtain the latest Sysmac Studio project file from OMRON in advance.
(To obtain the files, contact your OMRON representative.)
Additional Information
It may not be possible to reproduce the same operation with different devices or versions.
Check the configuration, model and version. If they are different from your configuration.
Contact your OMRON representative.
Additional Information
For information on the serial cable (RS-232C), refer to 3-3 RS-232C and RS-422A/485
Wiring in the CJ-series Serial Communications Units Operation Manual for NJ-series CPU
Unit (Cat.No. W494).
Additional Information
In this document, a USB is used to connect with the Controller. For information on how to
install a USB driver, refer to A-1 Driver Installation for Direct USB Cable Connection of the
Sysmac Studio Version 1 Operation Manual (Cat.No. W504).
5. Applicable Products and Support Software
NJ501-1500+
CJ1W-SCU42
Serial Communications
Cable (RS-232C)
Name
CJ1W-SCU42
NJ501-1500
NJ-PA3001
SYSMAC-SE2[][][]
OMRON_G9SP_SERI23
2_LD_EV100.SMC
-
-
-
G9SP-N20S
CP1W-CIF01
CP1W-ME05M
CP1W-20EDT
CP1W-CN811
CP1W-20EDT
G9SP-N20S
(Up to 2 Expansion I/O
CP1W-CIF01
Units can be connected.)
CP1W-ME05M
Expansion I/O Connecting Cable
Model
Ver.2.0
Ver.1.01
Ver.1.02
Ver.1.00
Ver.1.00
Version
5