7.3.5.
Transferring the Unit Settings
Transfer the setting data of the Serial Communication Unit.
1
Select Mode - PROGRAM
Mode from the Controller Menu.
2
A confirmation dialog box is
displayed. Click the Yes Button.
3
PROGRAM mode is displayed
on the Controller Status Pane.
4
Double-click CPU/Expansion
Racks under Configurations
and Setup in the Multiview
Explorer.
Select the Serial
Communications Unit figure.
Click Edit Special Unit
Settings.
5
The 0 [Unit 0]: Tab is displayed.
Click the Transfer to Controller
Button.
7. Connection Procedure
20