Omron G9SP-N20S Network Connection Manual page 15

7.3.2. Starting the Sysmac Studio and Importing the Project File
Start the Sysmac Studio, and import the Sysmac Studio project file.
Install the programming software and USB driver in the personal computer beforehand.
1
Start the Sysmac Studio.
Click the Import Button.
*If a confirmation dialog for an
access right is displayed at
start, select to start.
2
The Import File Dialog Box is
displayed. Select
OMRON_G9SP_SERI232_LD_
EV100.smc (Sysmac Studio
project file) and click the Open
Button.
*Obtain the Sysmac Studio
project file from OMRON.
3
OMRON_G9SP_SERI232_LD_
EV100 project is displayed.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
Multiview Edit Pane
Explorer
7. Connection Procedure
Toolbox
12