8
The Task Settings Tab Page is
displayed in the Edit Pane.
Click the Program Assignment
Settings Button and confirm
that Program0 is set under
PrimaryTask.
9
Select Check All Programs
from the Project Menu.
10
The Build Tab Page is displayed
in the Edit Pane.
Confirm that "0 Errors" and "0
Warnings" are displayed.
11
Select Rebuild Controller from
the Project Menu.
A screen is displayed indicating
the conversion is being
performed.
12
Confirm that "0 Errors" and "0
Warnings" are displayed in the
Build Tab Page.
7. Connection Procedure
15