Omron G9SP-N20S Network Connection Manual page 47

3. SerialRcv instruction execution management
No. Overview
3.1. Generating a
SerialRcv instruction
execution flag
3.2. Executing the
SerialRcv instruction
3.3. Checking for
SerialRcv instruction
error
3.4. Checking for data
receive completion
If G9SP_SerialSend_End is turned ON and the receive
completion flag is turned ON, Turns ON
G9SP_SerialRcv_Excute and starts the SerialRcv instruction
execution processing.
This flag is turned OFF when Done flag of the SerialRcv
instruction is turned ON.
If the receive completion flag is not turned ON for a certain
period of time (200 ms), G9SP_SerialRcv_Excute is turned
ON and the SerialRcv instruction is executed.
Executes the SerialRcv instruction
Turns ON the G9SP_SerialRcv_Error flag when the Error flag
of the SerialRcv instruction is turned ON.
Turns ON G9SP_SerialSend_End when
G9SP_SerialRcv_Excute is turned OFF.
9. Project File
Description
44