Device Configuration - Omron NJ Series Network Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedure of this document are as
follows:
USB cable
Manufacturer Name
OMRON NJ-series CPU Unit
(Built-in EtherNet/IP port)
OMRON Power Supply Unit
OMRON Switching Hub
OMRON Sysmac Studio
OMRON Network Configurator
OMRON Sysmac Studio project file
OMRON Network Configurator v3
network configuration file
- Personal computer
(OS: Windows7)
- USB cable
(USB 2.0 type B connector)
OMRON Ethernet cable (with industrial
Ethernet connector)
Displacement Sensor
OMRON
Controller
Displacement Sensor
OMRON
Sensor Head
Calibration ROM
OMRON
OMRON Recommended power supply:
DC24V 2.5A 60W
Precautions for Correct Use
Prepare the latest "Sysmac Studio project file" and "Network Configurator v3 network
configuration file" from OMRON in advance.
(To obtain the files, contact your OMRON representative.)
Additional Information
Update the Sysmac Studio to the version specified in this section or higher version using the
auto update function.
If a version not specified in this section is used, the procedures described in Section 7 and
subsequent sections may not be applicable. In that case, use the equivalent procedures
described in the Sysmac Studio Version 1 Operation Manual (Cat.No. W504) and Network
Configurator's Online Help.
5. Applicable Products and Support Software
NJ501-1500
(Built-in EtherNet/IP port)
Ethernet
cable
ZW-CE10
Switching Hub
(W4S1-05C)
Calibration ROM
Model
NJ501-1500
NJ-PA3001
W4S1-05C
SYSMAC-SE2[][][]
(Included in Sysmac Studio.)
OMRON_ZW_EIP_EV100.smc
OMRON_ZW_EIP_EV100.nvf
-
-
XS5W-T421-[]M[]-K
ZW-CE10
ZW-S40
(Included with Sensor Head.)
S8VS-06024
ZW-S40
Version
Ver.1.03
Ver.1.0
Ver.1.05
Ver.3.55
Ver.1.00
Ver.1.00
Ver.1.110
7