Related Manuals; Terms And Definitions - Omron G9SP-N20S Network Connection Manual

1. Related Manuals

The table below lists the manuals related to this document.
To ensure system safety, make sure to always read and heed the information provided in all
Safety Precautions, Precautions for Safe Use, and Precaution for Correct Use of manuals for
each device which is used in the system.
Cat. No. Model
W500 NJ501-[][][][]
W501 NJ501-[][][][]
W494 CJ1W-SCU[]2
W502 NJ501-[][][][]
W504 SYSMAC-SE2[][][] Sysmac Studio Version 1 Operation Manual
Z922 G9SP-[][][][]
Z923 G9SP-[][][][]

2. Terms and Definitions

Terms
No-protocol
Send message
Receive message
NJ-series CPU Unit Hardware User's Manual
NJ-series CPU Unit Software User's Manual
CJ-series Serial Communications Units Operation Manual for
NJ-series CPU Unit
NJ-series Instructions Reference Manual
G9SP Series Safety Controller Operation Manual
G9SP Series Safety Controller Instructions Reference Manual
Explanation and Definition
No-protocol Mode enables you to receive or send data by using SCU
Send Serial (SerialSend) or SCU Receive Serial (SerialRcv)
instructions. In this mode, messages are sent/received to/from a
destination device.
A send message is a communications frame (command) sent from the
Serial Communications Unit to the destination device. This is executed
by the SerialSend instruction and sent to the destination device.
A receive message is a communications frame (response) sent from the
destination device to the Serial Communications Unit. The SerialRcv
instruction is used to read data received from the destination device.
1. Related Manuals
Manual name
1