Omron G9SP-N20S Network Connection Manual page 24

6
A confirmation dialog box is
displayed.
Click the Yes Button.
A dialog box is displayed
indicating transferring is being
performed.
A confirmation dialog box is
displayed.
Click the Yes Button.
7
The Port Selection Dialog Box is
displayed.
Select All ports and click the
OK Button.
*You can select HostLink2
instead of All ports.
8
A confirmation dialog box is
displayed.
Click the OK Button.
9
Select Port2: No-Protocol
Settings from the pull-down list
of Parameter group to show.
Click the Compare Button.
10
Confirm that "≠" (mismatch) is
not shown in the red frame on
the right.
7. Connection Procedure
21