Specifications Of Accessories; List Of Accessories - Omron VS mini J7 User Manual

Specifications of Accessories

9-2

Specifications of Accessories

9-2-1

List of Accessories

Mounting Accessories
Name
Adapter Panel
(for J7AZ Series)
RS-422/485 Communications
Unit
Fan Unit
Dedicated Accessories
Name
Digital Operator (with adjuster) JVOP-140
Digital Operator
(without adjuster)
Digital Operator Case
(for 3G3IV-PJVOP140)
Digital Operator Connection
Cable
DIN Track Mounting
Bracket
Recommendable Separate Accessories
Name
EMC-conforming Input Noise
Filter
Model
SI232J/J7 & SI232J/J7C
SI485/J7
FAN00106_
Model
JVOP-146
3G3IV-PEZZ08386A
3G3IV-PCN126/326
3G3IV-PEZZ08122 _
Model
3G3JV-PFI_
Description
Interface required to connect a Digital Operator to a
J7AZ Inverter. There are two types of Adapter Panels
available: a fixed type (SI232J/J7) and a detach-able
type (SI232J/J7C). Use the detachable type for copying
parameters.
Interface required to perform RS-422/485 general-
purpose communications. The communications protocol
conforms to MODBUS (same protocol as V7AZ and F7Z
Inverters).
Replacement for the existing cooling fan of the Inverter.
Replace the cooling fan if it has reached the end of its
service life or a warning of cooling fan failure (FAN) is
indicated.
Description
Operator used to perform operations for J7AZ and V7AZ
Inverters. It is identical to the Digital Operator attached
to standard V7AZ Inverters, and has a built-in EEPROM
in which the Inverter's parameter settings can be stored.
If the Digital Operator Case (3G3IV-PEZZ08386A) is
used, the Inverter can be mounted in a control panel, or
operated by remote control.
Operator used to perform operations for J7AZ and V7AZ
Inverters by remote control. It has a built-in EEPROM in
which the Inverter's parameter settings can be stored.
Case for JVOP-140 Digital Operator. Mounting a JVOP-
140 in the Case allows the Inverter to mounted in a
control panel, or operated by remote control.
Required when using a Digital Operator with J7AZ
Inverters. Cable length: 1 m, 3 m.
An adapter making it possible to easily mount the
Inverter to DIN tracks.
Description
A Noise Filter on the input side meeting the EC Directive's
EMC requirements. The top of the Noise Filter has
mounting screw holes with which the Inverter mounted to
the Noise Filter can be secured.
Chapter 9-2
135