Omron VS mini J7 User Manual page 98

Other Functions
Frequency Detection Levels 1 and 2
n58
Setting 0.0 to 400 (Hz)
range
Frequency Detection Level 1
Output
frequency
Frequency
detection level 1
Frequency Detection Level 2
Output
frequency
Reset width +2 Hz
Frequency
detection level 2
84
• The parameter n40 for multi-function output must be set for frequency
detection output.
Set value: 4 for frequency detection level 1 (Output frequency ≥ n58)
Set value: 5 for frequency detection level 2 (Output frequency ≤ n58)
• Set the frequency detection level in n58.
Frequency Detection Level
Unit of
setting
Note The value will be set in 0.1-Hz increments if the frequency is less than 100 Hz
and 1-Hz increments if the frequency is 100 Hz or over.
ON
Changes during
operation
0.1 Hz Default setting
(see note)
Reset width ±2 Hz
ON
ON
Chapter 6-7
No
0.0
n58 (Frequency
detection level)
Time
Time
n58 (Frequency
detection level)
Time
Time