Requesting An Echo Profile; Device Address - Siemens SITRANS LR560 Operating Instructions Manual

Requesting an Echo Profile

• In PROGRAM mode, navigate to: Level Meter >
Diagnostics (3.) > Echo Profile (3.1.).
• Press RIGHT arrow
confidence
• Use UP
that feature becomes active.
• To move a cross-hair, press RIGHT arrow
to decrease.
• To Zoom into an area, position the intersection of the cross-hairs at the center of
that area, select Zoom, and press RIGHT arrow
out.
• To update the profile, select Measure and press RIGHT arrow
• To return to the previous menu, select Exit then press RIGHT arrow

Device Address

Note:
The address can only be changed from a remote master such as NI-FBUS
Configurator or DeltaV. For further details see Addressing in the manual,
Fieldbus for Level instruments (7ML19985MP01)
Read only. The unique address of the device on the network.
• In PROGRAM mode, navigate to: Level Meter > Communication (5.) > Device
Address (5.2.) to view the device address.
• Press Mode
7ML19985LY01
to request a profile.
distance from Low Calibration Point to vertical cross-hair
algorithm: tF (trueFirst)
distance from flange face to target
echo
TVT
or DOWN arrow to scroll to an icon. When an icon is highlighted
to return to Measurement mode.
SITRANS LR560 (FF) – OPERATING INSTRUCTIONS
pan left/right - selected
pan up/down
zoom
measure
exit
to increase the value, LEFT arrow
. Press LEFT arrow
.
to Zoom
.
Foundation
Page 39