Connecting To Nmea Heading Output Device - JRC JMA-5312-6/6HS Installation Manual

3.8
CONNECTING TO NMEA HEADING
OUTPUT DEVICE
Connect a gyro equipment or equivalent that provide a below turn rate, otherwise the performance of
signal process and target tracking decrease.
Standard craft
High speed craft
Following NMEA sentences are available.
THS, HDT, HDG, HDM, VHW
1) Connection
Remove the radar process unit cabinet cover and connect the NMEA line to TB4303 of terminal board.
12 deg/sec
20 deg/sec
3-14
TB4303
COMPASS-
COMPASS+
3