JRC JMA-5312-6/6HS Installation Manual page 36

PIN number Color
1 Blue (thick), gray (thick)
2 Purple (thick), brown (thick)
3 White (thick), orange (thick)
4 Red (thick), green (thick)
5 Black (thick), light blue
(thick)
6 Black
7 Drain line (coaxial)
(Drain line: coaxial, shield
meshwork)
8 -
9 Yellow (thick), pink (thick)
10 Coaxial line core
11 Yellow
12 Green
13 White
14 Drain line (shield)
(Drain line: shield, shield
meshwork)
15 Shield line core
16 Orange (medium)
Cover Shield meshwork
(Drain line, coaxial, drain
line shield)
Outer diameter of the cable: 14 mm±0.5 mm
Although a cable is not connected to PIN No.8, +12 V voltage is outputted to the radar process unit side.
Power for the external simulator is supplied by this +12 V power supply outlet. So, avoid using this
connection for other purposes to prevent short-circuits.
Cable CFQ-6912 wiring table
Wire material
AWG16
AWG16
AWG16
AWG16
AWG16
AWG22
AWG24
-
AWG16
AWG24
AWG24, twist pair
AWG24
AWG24, twist pair
AWG24
AWG24
AWG22
3-7
Signal name
MOTOR-
MOTOR-
MOTOR+
MOTOR+
TRX-
GND
VDE
+12V
TRX+
VD
COM+
BZ
COM-
TIE
TI
BP