JRC JMA-5312-6/6HS Installation Manual page 77

4) Set on/off for each sensor.
These sentences can be turned on/off.
Available sentences
TTM(TT), TLL(TT), TTD(TT), TLB(TT), OSD, RSD, ALR, ACK, TTM(AIS), TLL(AIS),
TTD(AIS), TLB(AIS)
3) Receive Port Setting (RX Port)
Select ports for receiving signals from sensors.
There are two methods for receiving signals: specifying a port for each sensor, or using the automatic
recognition function without specifying ports.
1) Press and hold [RADAR MENU] key.
The Code Input menu will appear.
2) Press the [0] key, and put the cursor on the
The Serviceman Menu will appear.
3) Open the RX Port menu by performing the following menu operation.
2. Installation Menu
→ 9. Next
4) Select ports for each sensor.
Available sensor signals
Heading, Speed, AIS, GPS, DLOG, Alarm, Depth, Temperature, Wind, Current, ROT, RSA, Time
Zone, Date/Time
Available ports
When the automatic recognition function is used
When ports are specified
Behavior pattern of selectable ports
AUTO
User Setting
Own
LAN
LAN(GPS)
LAN(Ship's Clock)
i. In order to set "Instruction Manual 3.14.1 Receive Port Setting (RX Port)", select
User Setting
ii. LAN(GPS)
Date/Time.
ENT button, and press the [ENT] key.
→ 5. LAN Port Setting
→ 2. RX Port
: User Setting, Serial, LAN, LAN(GPS), LAN(Ship's Clock)
: The system use data from JRC-LAN preferentially
: The system use the port selected by "3.14.1 Receive
Port Setting (RX Port)". The system use data from
JRC-LAN or sensor connected directly
: The system use data from sensor connected to the
system directly.
: The system use data from JRC-LAN.
: The system use GPS data from GPS connected to
JRC-LAN
: The system use ship's clock data from ship's clock
connected to JRC-LAN
in advance.
and LAN(Ship's Clock)
3-48
: AUTO
ii
.
ii
.
are selectable signals for Time Zone and
3