242-244 Paper Jams - Lexmark MX310 Service Manual

242–244 paper jams
242 paper jam messages
Error code Description
242.01 Paper over tray 2 pass through sensor on warm-
up.
242.02 Input sensor detected late feed during a pick retry
from tray 2.
242.03 Tray 2 pass through sensor never became
covered when feeding a sheet from an option
below.
242.06 Failed to feed from tray. Paper present sensing
supported and indicates media still in tray.
242.07 Option tray 2 pass through sensor never became
uncovered when feeding a sheet from an option
below.
242.09 Tray 2 pick motor lost encoder.
242.11 ACM Pick/Lift Motor—Encoder Never Detected in
tray 2.
242.12 Motor ramp up error in tray 2.
242.13 Page to be stapled failed to feed from tray.
242.14 Sheets flushed from paper path either due to feed
error or cartridge error.
242.15 One or more trays located above the source tray
2 has been pulled.
242.16 The engine timed out waiting for the tray 2 to
report ready before the 1st pick attempt.
242.17 Page was not properly picked from tray 2. Have
not exhausted all pick retry attempts as there are
sheets committed to the paper path from below.
242.19 Tray 2 fail to feed error. Detected while trying to
pick a sheet, and that leading edge was not
detected by tray sensor.
Action
Go to
page
Diagnostics and troubleshooting
112
"Option tray jam service check" on
118.
7015