Understanding The Home Screen - Lexmark MX310 Service Manual

Sleep button light
Blinking amber
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home
screen buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen;
or respond to messages.
Note: Your home screen may vary depending on your home screen customization settings, administrative
setup, and active embedded solutions.
# Touch
1 Copy
2 Fax
3 E‑mail
4 FTP
5 Menu icon
6 Status message bar
7 Status/Supplies
This may also appear on the home screen:
Printer status
The printer is entering or waking from Hibernate mode.
The printer is in Hibernate mode.
To
Access the Copy menus and make copies.
Access the Fax menus and send faxes.
Access the E-mail menus and send e‑mails.
Access the File Transfer Protocol (FTP) menus and scan documents directly to an FTP
server.
Access printer menus.
Note: The menus are available only when the printer is in ready state.
Show the current printer status such as Ready or Busy.
•
Show printer supply conditions such as Imaging unit low or Cartridge Low.
•
•
Show intervention messages and the instructions on how to clear them.
•
Show a printer warning or error message whenever the printer requires intervention
to continue processing.
•
View more information on the printer warning or message, and on how to clear it.
Service menus
217
7015