Removal Procedures; Left Side Removals; Left Cover Removal - Lexmark MX310 Service Manual

Removal procedures

Keep the following tips in mind as you replace parts:
•
Some removal procedures require removing cable ties. You must replace cable ties during reassembly to
avoid pinching wires, obstructing the paper path, or restricting mechanical movement.
•
Remove the toner cartridges, imaging unit, and media tray before removing other printer parts. The imaging
unit should be carefully set on a clean, smooth, and flat surface. It should also be protected from light while
out of the device.
•
Disconnect all external cables from the printer to prevent possible damage during service.
•
Unless otherwise stated, reinstall the parts in reverse order of removal.
•
When reinstalling a part held with several screws, start all screws before the final tightening.

Left side removals

Left cover removal

1
Remove the paper tray.
2
Remove the screw (A) securing the left cover to the front of the printer frame.
A
Parts removal
279
7015