200 Paper Jams - Lexmark MX310 Service Manual

200 paper jams

200 paper jam messages
Notes:
•
Some error messages are applicable only to printer models with installed polygon LSU (laser scanning
unit).
•
If the sixth digit character assigned to the serial number of the printer is in the P–Z range, then the
printer is installed with a polygon LSU (example: 4514 2ZHH 007CR).
Error code Description
200.01 Input sensor covered during warm-up sequence. Go to
200.02 Input sensor covered too quickly.
200.03 Media did not reach input sensor from MPF.
200.05 Input sensor covered too long.
200.07 Input sensor failed to become uncovered from
sheet ahead.
200.08 Page arrive at input senor at unexpected time.
200.09 Printhead did not receive proper motor feedback
to start laser servo.
200.10 Printhead motor not locked when media reaches
the input sensor.
200.11 Printhead motor fell out of lock after page reaches
the input sensor.
Mirror motor got locked, and then lost it again
before the initial lock timeout.
200.12 Printhead was not ready for media.
200.13 Media at input sensor is not the next media to be
imaged.
200.14 Media reached the input sensor before EP was
ready.
200.15 Image data did not start on time.
200.16 Fuser motor stalled.
200.19 Page that was successfully picked from option tray
never reached the input sensor.
Action
on page
Go to
check" on page
Go to
check" on page
Go to
check" on page
Go to
check" on page
Go to
check" on page
Go to
on page
Go to
on page
Go to
on page
Go to
on page
Go to
on page
Go to
on page
Go to
on page
Go to
on page
Go to
check" on page
Go to
check" on page
Diagnostics and troubleshooting
98
"Sensor (input) static jam service check"
100.
"Sensor (input) early/late arriving service
100.
"Sensor (input) early/late arriving service
100.
"Sensor (input) early/late arriving service
100.
"Sensor (input) early/late arriving service
100.
"Sensor (input) early/late arriving service
100.
"Sensor (input) image jam service check"
102.
"Sensor (input) image jam service check"
102.
"Sensor (input) image jam service check"
102.
"Laser scanning unit (LSU) service check"
152.
"Sensor (input) image jam service check"
102.
"Sensor (input) image jam service check"
102.
"Sensor (input) image jam service check"
102.
"Sensor (input) image jam service check"
102.
"Main drive motor control jam service
103.
"Sensor (input) early/late arriving service
100.
7015