Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual page 54

Basic Administration
Step by Step
v u q j
<PROG>
<VIEW>
<PROG>
<PROG>
<PROG>
54
Manual Configuration
If your network does not use a DHCP server, you must
disable the DHCP IP assignment manually and specify
the phone's IP address and subnet mask and the net-
work gateway IP address (default route) for the phone.
Entering the administration area
e d g
Press the keys simultaneously
or
Press the keys successively.
o
Enter admin password
(default: 123456).
r
Terminate the operation.
You are now in the Administration Area (all LEDs
flash).
The top two function keys take over the following func-
tions in this area:
st
1 Function key
Press 1
nd
2 Function key
Press 2
codes see
Configure basics
Press 1
dd
Enter code
d
Switch the DHCP IP assign off.
r
Terminate the operation.
Press 1
de
Enter code.
o
Enter IP address of the optiPoint 410 entry
(to edit see
r
Terminate the operation.
Press 1
st
function key to make settings.
nd
function key to view settings. (ASCII results
Seite 160)
st
function key.
st
function key.
Seite 160).
st
function key.