Specify Configuration Update File - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Extended Administration

Specify configuration update file

Parameter
Configuration
update
check for update
Error Log
Configuration
update FTP IP
Configuration
update FTP Port
Configuration
update
Pathname
Configuration
update
Account name
88
Phone path
(Menu
- 12=Config Update
- 01=Check for update
page 169
(confirm to start the check
manualy)
page 136 (not applicable)
- 12=Config Update
page 172
- 02=Ftp DL Params
- 01=Config FTP Addr
(change/enter IP address)
- 12=Config Update
page 172
- 02=Ftp DL Params
- 02=Config FTP Port
(enter Port address)
- 12=Config Update
- 02=Ftp DL Params
page 172
- 03=Config UD Pathname
(enter path name)
- 12=Config Update
- 02=Ftp DL Params
page 171
- 04=Account ID
(enter Account ID)
Web Interface path
page 148) (Menu
- Configuration management
- Check for updates
(confirm to start the check man-
ualy)
- Configuration management
- Error Log
(confirm to open the error log file
if exists)
- Configuration management
- Settings
- Non-secure configuration
download (FTP)
- FTP server IP address or DNS
name (enter IP address)
- Configuration management
- Settings
- Non-secure configuration
download (FTP)
- FTP server Port
(enter Port)
- Configuration management
- Settings
- Non-secure configuration
download (FTP)
- FTP Path
(enter Path name)
- Configuration management
- Settings
- Non-secure configuration
download (FTP)
- FTP Account name
(enter Account name)
page 109)