Error Messages Optipoint 410 Entry - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual
Siemens ip phone - ip telephone user manual
Hide thumbs
Also See for HIPATH 8000 HIPATH 8000:
- Administration manual (260 pages) ,
- User manual (217 pages) ,
- Operating manual (193 pages)
Table of Contents
Advertisement
Troubleshooting
Error Messages optiPoint 410 entry
The LEDs flash till you switch to the Administration Mode
page 54.
LEDs on the
No IP address
phone:
The DHCP server cannot assign a terminal IP address
page 53
Code 1).
Possible solution
Check the DHCP server.
Terminal Mask not assigned
The DHCP server has failed to assign a Terminal Mask
page 53
(Code 2).
Possible solution
Check the DHCP server.
No Default Route
The DHCP server cannot assign a default route
page 53 (Code 3).
Possible solution
Check the DHCP server.
No IP Address is set
The DHCP IP assignment
page 54 is switched off and no terminal IP ad-
dress is configured (Code 4).
Possible solution
Activate the DHCP IP assignment
page 54.
Enter the terminal IP adress
page 54.
239
Advertisement
Table of Contents
