Consult the dealer or an experienced radio/TV technician for help. This product is a UL Listed Accessory, I.T.E., in U.S.A. and Canada. This equipment also complies with the Part 68 of the FCC Rules and the Industrie Canada CS-03. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
OpenStage phone step by step, wherever expedient. For the users, a sep- arate manual is provided. You can find further information on the official Siemens Enterprise Communications website (http://www.enterprise-communications.siemens.com) and on the Siemens Enterprise Wiki (ht- tp://wiki.siemens-enterprise.com).
Overview The OpenStage Family The OpenStage Family 1.6.1 OpenStage 60/80 A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
The Graphics Display provides intuitive support for telephone operation. The user-friendly Application Keys provide easy access to your telephone’s applications. With the Navigation Key, the user/administrator can navigate in the various phone functions, applications, and configuration menus. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
The Audio Keys let you optimize the audio settings on your telephone. Inbound calls are visually signaled on the Call Display. The Keypad is used for entering phone numbers and text. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
IP phones in your network. Direct access to the phone is not required. To use this method, the phone must first obtain IP connectivity. > A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
This method provides direct configuration of an the OpenStage phone. Direct access to the phone is required. As long as the IP connection is not properly configured, you have to use this method > to set up the phone. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
An FTP Server for file transfer, e. g. firmware, configuration data, application software. • A DHCP (Dynamic Host Configuration Protocol) server (recommended). • DLS (Deployment Service) for advanced configuration and software deployment (recommended). A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Document "Information and Important Operating Procedures" • Emergency number sticker • Emergency Number Sticker 2.2.2 Connectors at the bottom side OpenStage 60 Keyboard Power supply Extension Switch Headset Key Module Handset A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 19
Startup Assembling and Installing the Phone OpenStage 40 (similar to OpenStage 20, except [1] OpenStage 40 only Power supply Switch Headset Key Module Handset A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Emergency Number Sticker Write your telephone number and those for the fire and police departments on the included label and attach it to the telephone housing underneath the handset (see arrow). A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Use only the plug-in power supply unit fitting the OpenStage phone: EU: C39280-Z4-C510 UK: C39280-Z4-C512 USA: C39280-Z4-C511 Plug the power supply unit into the mains. Connect the plug-in power supply unit to the jack at the bottom of the phone. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 22
To prevent damage on the OpenStage phone, connect an USB stick using the adapter cable C39195-Z7704-A5. Do not connect a USB hub to the phone’s USB port, as this may lead to stability problems. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
In the upper right corner, the phone number, the phone’s IP address, as well as the DNS name assigned to the phone are displayed. The left corner contains the user menu tree. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Plug&Play facility of the DLS is used. For further information about this setting, please refer to Section 3.5.1.1, “Terminal Identity”. With the WBM, the teminal number is configured as follows: A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 25
Startup Quick Start In the left column, select System > System Identity to open the "System Identity" dialog. Enter the terminal number, i. e. the SIP name / phone number. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
The IP Address or hostname of a SIP server can be provided by DHCP. The option’s name and code are as follows: • option #120 "SIP Servers DHCP Option" For manual configuration of the SIP server address see Section 3.5.5.1, “SIP Addresses”. A31003-O1010-M100-10-76A9, 13/06/2008 2-10 HiPath 8000 - OpenStage Family, Administration Manual...
Service (DLS)”. For the configuration of vendor-specific settings by DHCP, there are two alternative methods: 1) the use of a vendor class, or 2) the use of DHCP option 43. A31003-O1010-M100-10-76A9, 13/06/2008 2-11 HiPath 8000 - OpenStage Family, Administration Manual...
1 "Optipoint element 001" STRING 0 vendor=OptiIpPhone comment="Tag 001 for Optipoint" The value "Siemens" for optiPoint Element 1 can then be re-assigned using the DHCP console. This error was corrected in Windows 2003 Server SP2.
Page 29
ASCII and typing "OptiIpPhone". The binary value is displayed simultaneously. Click OK to apply the changes. The new vendor class now appears in the list: Exit the window with Close. A31003-O1010-M100-10-76A9, 13/06/2008 2-13 HiPath 8000 - OpenStage Family, Administration Manual...
Page 30
In the dialog, select the previously defined OptiIpPhone class and click on Add... to add a new option. (If the workaround for a pre-SP2 Windows 2003 Server has been applied, the first option will be there already.) A31003-O1010-M100-10-76A9, 13/06/2008 2-14 HiPath 8000 - OpenStage Family, Administration Manual...
Page 31
• Description: Free text, e. g. "tag 1 for OptiIpPhone class". Click OK to return to the previous window. 10. The newly created option is displayed now. Enter "Siemens" in the Value field. A31003-O1010-M100-10-76A9, 13/06/2008 2-15 HiPath 8000 - OpenStage Family, Administration Manual...
Page 32
Value field. In the example, the VLAN ID is 10 (Hex: 2A). If you do not intend to configure the DLS address, click OK and continue with step 15. A31003-O1010-M100-10-76A9, 13/06/2008 2-16 HiPath 8000 - OpenStage Family, Administration Manual...
Page 33
14. The newly created option is displayed now. Enter the DLS address in the Value field, using the following format: <PROTOCOL>:://<IP ADDRESS OF DLS SERVER>:<PORT NUMBER> In the example, the DLS address is "sdlp://192.168.3.30:18443". Click OK. A31003-O1010-M100-10-76A9, 13/06/2008 2-17 HiPath 8000 - OpenStage Family, Administration Manual...
Page 34
(OptiIpPhone) and, under User class, select Default User Class. Activate the check boxes for the options that you want to assign to the scope (in the exam- ple, 001, 002, and 003). Click OK. A31003-O1010-M100-10-76A9, 13/06/2008 2-18 HiPath 8000 - OpenStage Family, Administration Manual...
Page 35
17. The DHCP console now shows the information that will be transmitted to the corresponding workpoints. Information from the Standard vendor is transmitted to all clients, whereas in- formation from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in this vendor class. A31003-O1010-M100-10-76A9, 13/06/2008 2-19 HiPath 8000 - OpenStage Family, Administration Manual...
Tag 4: DLS hostname The Vendor name tag is coded as follows (the first line indicates the ASCII values, the second line contains the hexadecimal values): Code Length Vendor name Table 2-2 A31003-O1010-M100-10-76A9, 13/06/2008 2-20 HiPath 8000 - OpenStage Family, Administration Manual...
Page 37
In the Windows Start menu, select Start > Programs > Administrative Tools > DHCP. Select the DHCP server and the scope. Choose Configure Options in the context menu using the right mouse button. A31003-O1010-M100-10-76A9, 13/06/2008 2-21 HiPath 8000 - OpenStage Family, Administration Manual...
Page 38
If the VLAN ID is to be provided by DHCP: Enter the hexadecimal value in Data entry. Pro- viding the length is not required here, as the VLAN ID is always 4 Bytes long. In the exam- ple, the VLAN ID is 10 (Hex: 2A). A31003-O1010-M100-10-76A9, 13/06/2008 2-22 HiPath 8000 - OpenStage Family, Administration Manual...
Page 39
For ensuring proper functionality, the port number should not be followed by any > character. In the example, the DLS address is "sdlp://192.168.3.30:18443". Note that the screenshot also shows the VLAN ID described in step 4. Click OK. A31003-O1010-M100-10-76A9, 13/06/2008 2-23 HiPath 8000 - OpenStage Family, Administration Manual...
Page 40
Startup Quick Start The DHCP console now shows the information that will be transmitted to the corresponding workpoints. A31003-O1010-M100-10-76A9, 13/06/2008 2-24 HiPath 8000 - OpenStage Family, Administration Manual...
2.3.8 Registering at the HiPath 8000 For registration at the HiPath 8000 SIP server, a SIP user ID and passwort must be provided by the phone. The following procedure describes the configuration using the web interface (see Section 2.3.1, “Access the Web Interface (WBM)”; if the web interface is not applicable, please refer to Section 3.5.6, “Authenticated Registration”):...
By default, password entry is in numeric mode. For changing the mode, press the # key once or repeatedly, depending on the desired character. The # key cycles around the input modes as follows: (Abc) -> (abc) -> (123) -> (ABC) -> back to start. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 44
- open a context menu - delete character left - down one level of cursor - up one level Press the key briefly: - scroll down Hold down: - scroll to end of list A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 45
Switch to punctuation and special characters. Toggle between lowercase characters, uppercase characters, and digits in the following order: (Abc) -> (abc) -> (123) -> (ABC) -> back to start. Tabelle 3-1 A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 46
Navigator, you can enter, delete, copy and paste characters and numbers as well as navi- gate within an entry and toggle the input mode. Save and exit When you are done, select Save & exit and press A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
"100 Mbps full duplex", "1 Gbps half duplex" (OpenStage 60/80 G), "1 Gbps full du- plex" (OpenStage 60/80 G). Default: "Automatic". • PC port mode / PC port status: Controls the PC port. Value range: "disabled", "enabled", "mirror". Default: "disabled". A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 48
Network > Port configuration Administration via Local Phone --- Administration --- Network --- Port Configuration |--- LAN port type |--- PC port status |--- PC port type --- PC port autoMDIX A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
VLAN, and the PC connected to the phone’s PC port is a member of the data VLAN. The VLAN ID can be configured automatically by DHCP or manually. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
VLAN discovery mode must be set to "DHCP". The DHCP server must be config- ured to supply the Vendor Unique Option in the correct Siemens VLAN over DHCP format. If a phone configured for VLAN discovery by DHCP fails to discover its VLAN, it will proceed to con- figure itself from the DHCP within the non-tagged LAN.
DHCP server cannot be found, in fixed IP mode no server connections will be pos- sible. Administration via WBM Network > IP configuration Administration via Local Phone --- Administration --- Network --- IP Configuration --- VLAN ID A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Layer 2 signalling: Sets the CoS (Class of Service) value for signaling. Value range: 0-7. Default: 3. • Layer 2 default: Sets the default CoS (Class of Service) value. Value range: 0-7. Default: 0. A31003-O1010-M100-10-76A9, 13/06/2008 3-10 HiPath 8000 - OpenStage Family, Administration Manual...
EF in a multiple dropping system. The AF values are containing two digits X and Y (AFXY), where X is describing the priority class and Y the drop level. Four classes X are reserved for AFXY: AF1Y (high priority), AF2Y, AF3Y and AF4Y (low priority). A31003-O1010-M100-10-76A9, 13/06/2008 3-11 HiPath 8000 - OpenStage Family, Administration Manual...
Subnet mask: subnet mask that is needed for the subnet in use. Administration via WBM Network > IP configuration Administration via Local Phone --- Administration --- Network --- IP Configuration |--- IP address --- Subnet mask A31003-O1010-M100-10-76A9, 13/06/2008 3-15 HiPath 8000 - OpenStage Family, Administration Manual...
The change will only have effect if you restart the phone. > Administration via WBM Network > IP configuration Administration via Local Phone --- Administration --- Network --- IP Configuration --- Route (default) A31003-O1010-M100-10-76A9, 13/06/2008 3-16 HiPath 8000 - OpenStage Family, Administration Manual...
This is the name of the phone’s local domain. Administration via WBM Network > IP configuration Administration via Local Phone --- Administration --- Network --- IP Configuration --- DNS domain A31003-O1010-M100-10-76A9, 13/06/2008 3-18 HiPath 8000 - OpenStage Family, Administration Manual...
Secondary DNS: IP address of the secondary DNS server. Administration via WBM Network > IP configuration Administration via Local Phone --- Administration --- Network --- IP Configuration |--- Primary DNS --- Secondary DNS A31003-O1010-M100-10-76A9, 13/06/2008 3-19 HiPath 8000 - OpenStage Family, Administration Manual...
Security mode / Security status: Determines whether the communication between the phone and the DLS is secure. Value range: "Default mode", "Secure mode". Default: "Default". Administration via WBM Network > Update Service (DLS) A31003-O1010-M100-10-76A9, 13/06/2008 3-20 HiPath 8000 - OpenStage Family, Administration Manual...
Traps specific to OpenStage phones Currently, the following traps are defined: TraceEventFatal: sent if severe trace events occur; aimed at expert users. TraceEventError: sent if severe trace events occur; aimed at expert users. A31003-O1010-M100-10-76A9, 13/06/2008 3-21 HiPath 8000 - OpenStage Family, Administration Manual...
Page 64
Default: "QOSCD". • QoS to generic destination / QoS to generic device: Enables or disables the sending of QoS traps to a generic destination. Value range: "Yes", "No". Default: "No". A31003-O1010-M100-10-76A9, 13/06/2008 3-22 HiPath 8000 - OpenStage Family, Administration Manual...
Page 65
|--- Diag sending enabled |--- Diag destination |--- Diag destination port |--- Diag community |--- QoS traps to QCU |--- QCU address |--- QCU port |--- QCU community --- QoS to generic device A31003-O1010-M100-10-76A9, 13/06/2008 3-23 HiPath 8000 - OpenStage Family, Administration Manual...
If SIP server certificate validation resp. Backup SIP server certificate validation is activat- ed, the phone will validate the server certificate sent by the HiPath 8000 in order to establish a TLS connection. The server certificate is validated against the root certificate from the trusted certificate authority (CA), which must be stored on the phone first.
Terminal name: Name to be registered at the SIP registrar. Administration via WBM System > System Identity Administration via Local Phone --- Administration --- System --- Identity |--- Terminal number --- Terminal name A31003-O1010-M100-10-76A9, 13/06/2008 3-25 HiPath 8000 - OpenStage Family, Administration Manual...
Terminal number or Terminal name. Administration via WBM System > System Identity Administration via Local Phone --- Administration --- System --- Identity |--- Display identity --- Enable ID A31003-O1010-M100-10-76A9, 13/06/2008 3-26 HiPath 8000 - OpenStage Family, Administration Manual...
If a mailbox located at a remote server shall be used, its Voice mail number must be entered. Administration via WBM (V1R2.x) System > Features > Configuration Administration via WBM (V1R3.x upwards) System > Features > Configuration A31003-O1010-M100-10-76A9, 13/06/2008 3-27 HiPath 8000 - OpenStage Family, Administration Manual...
Page 70
Administration System Settings Administration via Local Phone --- Administration --- System --- Features --- Configuration --- General |--- Emergency number --- Voicemail number A31003-O1010-M100-10-76A9, 13/06/2008 3-28 HiPath 8000 - OpenStage Family, Administration Manual...
The length of the timespan ranges from 2 hours to 8 hours. Administration via WBM Local functions > Pixel saver Administration via Local Phone --- Administration --- Local Functions --- Pixel saver A31003-O1010-M100-10-76A9, 13/06/2008 3-29 HiPath 8000 - OpenStage Family, Administration Manual...
(New South Wales)", "Australia (Western Australia)", "Australia 2008+ (ACT, New South Wales, South Australia, Tasmania, Victoria)", "Brazil", "Canada", "Canada (Newfound- land)", "Europe (Portugal, United Kingdom)", "Europe (Finland)", "Europe (Rest)", "Mexi- co", "United States". A31003-O1010-M100-10-76A9, 13/06/2008 3-30 HiPath 8000 - OpenStage Family, Administration Manual...
Page 73
Administration System Settings Administration via WBM Date and Time Administration via Local Phone --- Administration --- Date and Time |--- SNTP IP address --- Timezone offset A31003-O1010-M100-10-76A9, 13/06/2008 3-31 HiPath 8000 - OpenStage Family, Administration Manual...
Difference (minutes): Timezone offset in minutes. Administration via WBM (User pages >) Date and time Administration via Local Phone --- Menu --- Date and Time |--- Time |--- Date |--- Daylight saving --- Difference (mins) A31003-O1010-M100-10-76A9, 13/06/2008 3-32 HiPath 8000 - OpenStage Family, Administration Manual...
SIP registrar address: IP address or host name of the registration server. • SIP gateway address: IP address or host name of the SIP gateway. Administration via WBM System > Registration A31003-O1010-M100-10-76A9, 13/06/2008 3-33 HiPath 8000 - OpenStage Family, Administration Manual...
SIP gateway: Port of the SIP gateway. Default: 5060. • SIP local: Port used by the phone for sending and receiving SIP messages. Default: 5060. Administration via WBM Network > Port configuration A31003-O1010-M100-10-76A9, 13/06/2008 3-34 HiPath 8000 - OpenStage Family, Administration Manual...
If registration has not succeeded at startup or registration fails after having been pre- > viously successfully registered the phone will try to re-register every 30 seconds. This is not configurable. A31003-O1010-M100-10-76A9, 13/06/2008 3-35 HiPath 8000 - OpenStage Family, Administration Manual...
Page 78
Administration via WBM System > Registration Administration via Local Phone --- Administration --- System --- Registration --- SIP Session |--- Registration timer |--- Server type |--- Realm |--- User ID --- Password A31003-O1010-M100-10-76A9, 13/06/2008 3-36 HiPath 8000 - OpenStage Family, Administration Manual...
If there is no backup server configured, the phone just tidies up internally. The data is given in milliseconds. The default value is 32 000; for the HiPath 8000, the recom- mended setting is 3.7 seconds (3700 ms).
Default OBP domain: Alternative value for the domain that is given in the outbound re- quest. Administration via WBM System > SIP interface Administration via Local Phone --- Administration --- System --- SIP Interface |--- Outbound proxy --- Default OBP domain A31003-O1010-M100-10-76A9, 13/06/2008 3-38 HiPath 8000 - OpenStage Family, Administration Manual...
Selects the transport protocol to be used for SIP messages. The values "UDP", "TCP", and "TLS" are available. The default is "UDP". Administration via WBM System > SIP interface Administration via Local Phone --- Administration --- System --- SIP Interface --- SIP transport A31003-O1010-M100-10-76A9, 13/06/2008 3-39 HiPath 8000 - OpenStage Family, Administration Manual...
Backup OBP flag: Determines whether or not the backup proxy is used as an outbound proxy. Value range: "Yes", "No". Default: "No". • Network > Port Configuration > Backup proxy: Port of the backup proxy server. Default: 5060. A31003-O1010-M100-10-76A9, 13/06/2008 3-42 HiPath 8000 - OpenStage Family, Administration Manual...
Page 85
Administration System Settings Administration via WBM System > Registration Network > Port configuration A31003-O1010-M100-10-76A9, 13/06/2008 3-43 HiPath 8000 - OpenStage Family, Administration Manual...
This parameter defines whether the Refuse Call feature is available on the phone. The possible values are "Yes" or "No". The default is "Yes". Administration via WBM (V1R2.x) System > Features > Configuration Administration via WBM (V1R3.x upwards) System > Features > Configuration A31003-O1010-M100-10-76A9, 13/06/2008 3-45 HiPath 8000 - OpenStage Family, Administration Manual...
Page 88
Administration Features - Configuration Administration via Local Phone --- Administration --- System --- Features --- Configuration --- General --- Allow refuse A31003-O1010-M100-10-76A9, 13/06/2008 3-46 HiPath 8000 - OpenStage Family, Administration Manual...
<groupcallpickup>@<SIP Server IP> (for instance **3@172.16.127.95 or Domain Name). Administration via WBM System > Features > Addressing Administration via Local Phone --- Administration --- System --- Features --- Addressing --- Group pickup URI A31003-O1010-M100-10-76A9, 13/06/2008 3-47 HiPath 8000 - OpenStage Family, Administration Manual...
GUI. To accept the call, the user must confirm the alert or press the corresponding function key, if configured. Administration via WBM System > Features > Configuration A31003-O1010-M100-10-76A9, 13/06/2008 3-48 HiPath 8000 - OpenStage Family, Administration Manual...
Page 91
Features - Configuration Administration via Local Phone --- Administration --- System --- Features --- Configuration --- Audio |--- Group pickup tone allowed |--- Group pickup as ringer --- Group pickup visual alert A31003-O1010-M100-10-76A9, 13/06/2008 3-49 HiPath 8000 - OpenStage Family, Administration Manual...
A goes on-hook, B gets connected to C. If Transfer on hangup is disabled, C will be released when A hangs up, and A has the possibility to reconnect to B. The default is "No". A31003-O1010-M100-10-76A9, 13/06/2008 3-50 HiPath 8000 - OpenStage Family, Administration Manual...
Page 93
System > Features > Configuration Administration via WBM (V1R3.x upwards) System > Features > Configuration Administration via Local Phone --- Administration --- System --- Features --- Configuration --- General --- Transfer on hangup A31003-O1010-M100-10-76A9, 13/06/2008 3-51 HiPath 8000 - OpenStage Family, Administration Manual...
Administration via WBM System > Features > Services Administration via Local Phone --- Administration --- System --- Features --- Addressing |--- Callback: Busy |--- Callback: No reply --- Callback: Cancel all A31003-O1010-M100-10-76A9, 13/06/2008 3-52 HiPath 8000 - OpenStage Family, Administration Manual...
It is recommended not to enter the full URI, but only the user part. For instance, enter > "123", not "123@<SIP SERVER ADDRESS>". A full address in this place might cau- se a conflict when the HiPath 8000 uses multiple nodes. Administration via WBM System > Features > Services...
Administration via WBM System > Features > Configuration Administration via Local Phone --- Administration --- System --- Features --- Configuration --- General --- Server features A31003-O1010-M100-10-76A9, 13/06/2008 3-55 HiPath 8000 - OpenStage Family, Administration Manual...
If Allow uaCSTA is enabled, applications which support the uaCSTA standard will have access to the OpenStage phone. The default is "Yes". Administration via WBM (V1R2.x) System > Features > Configuration Administration via WBM (V1R3.x upwards) System > Features > Configuration A31003-O1010-M100-10-76A9, 13/06/2008 3-56 HiPath 8000 - OpenStage Family, Administration Manual...
Page 99
Administration Features - Configuration Administration via Local Phone --- Administration --- System --- Features --- Configuration --- General --- Allow uaCSTA A31003-O1010-M100-10-76A9, 13/06/2008 3-57 HiPath 8000 - OpenStage Family, Administration Manual...
The timeout ranges from 1 to 5 five minutes. The default value is 2. Administration via WBM (V1R2.x) System > Features > Configuration Administration via WBM (V1R3.x upwards) System > Features > Configuration A31003-O1010-M100-10-76A9, 13/06/2008 3-58 HiPath 8000 - OpenStage Family, Administration Manual...
Page 101
Administration Features - Configuration Administration via Local Phone --- Administration --- System --- Features --- Configuration --- General --- Not used timeout A31003-O1010-M100-10-76A9, 13/06/2008 3-59 HiPath 8000 - OpenStage Family, Administration Manual...
The multiline appearance feature allows for multiple lines to be assigned to a keyset and for a line to be assigned to multiple keysets. This feature requires configuration in the HiPath 8000 and in the telephone, and is particularly useful for executive-assistant arrangements.
Page 103
• Realm: Domain wherein user id and password are valid. • User Identifier: User name for authentication with the SIP server. • Password: Password for authentication with the SIP server. A31003-O1010-M100-10-76A9, 13/06/2008 3-61 HiPath 8000 - OpenStage Family, Administration Manual...
Page 104
Administration via WBM Invoke the "Phone keys" dialog and select "line" in the pulldown menu of the key you want to configure. Next, press "Edit...". Features > Program keys A31003-O1010-M100-10-76A9, 13/06/2008 3-62 HiPath 8000 - OpenStage Family, Administration Manual...
Page 105
Web interface or DLS before. --- Administration --- System --- Features --- Configuration --- Keyset Lines --- Details For Keyset Line <xx> |--- Address |--- Ring on/off --- Selection order A31003-O1010-M100-10-76A9, 13/06/2008 3-63 HiPath 8000 - OpenStage Family, Administration Manual...
"incoming PLP": The earliest line to start audible ringing is selected, or else the earliest alerting (ringing suppression ignored) line is selected. However, if the prime line is alerting, it is given priority. A31003-O1010-M100-10-76A9, 13/06/2008 3-64 HiPath 8000 - OpenStage Family, Administration Manual...
Page 107
The reservation of a line is accomplished by the HiPath 8000 server, which notifies all the endpoints sharing this line. If set to 0, the reservation timer is deactivated.
Page 108
Value range: "Single button", "Preselection". Default: "Single button". • Preselect timer: Sets the timeout in seconds for accepting an incoming call. A31003-O1010-M100-10-76A9, 13/06/2008 3-66 HiPath 8000 - OpenStage Family, Administration Manual...
Page 109
|--- LED on registration |--- Originating line preference |--- Terminating line preference |--- Line action mode |--- Show focus |--- Reservation timer |--- Forward indicated |--- Preselect mode --- Preselect timer A31003-O1010-M100-10-76A9, 13/06/2008 3-67 HiPath 8000 - OpenStage Family, Administration Manual...
If Allow pickup to be refused is checked, the user is enabled to reject a call alerting on the line associated with the DSS key. The default is "No". Administration via WBM System > Features > DSS Settings A31003-O1010-M100-10-76A9, 13/06/2008 3-68 HiPath 8000 - OpenStage Family, Administration Manual...
Key label <key number>: Label to be displayed on the display. Default: "DSS". • Address: SIP Address of Record of the destination that is assigned to the DSS key. • Realm: SIP Realm of the DSS destination. A31003-O1010-M100-10-76A9, 13/06/2008 3-69 HiPath 8000 - OpenStage Family, Administration Manual...
Page 112
Allow in Overview: Determines whether the line appears in the phone’s line overview. Value range: "Yes", "No". Default: "Yes". Administration via WBM System > Features > Program keys > [edit] A31003-O1010-M100-10-76A9, 13/06/2008 3-70 HiPath 8000 - OpenStage Family, Administration Manual...
80. A maximum of 2 key modules can be connected to one phone. The configuration of a key on the key module is just the same as the configuration of a phone key. Administration via WBM System > Features > Key module 1/2 A31003-O1010-M100-10-76A9, 13/06/2008 3-71 HiPath 8000 - OpenStage Family, Administration Manual...
Emergency number: List of emergency numbers to be used for the phone. If there are more than one numbers, they must be separated by commas. The numbers entered here are not converted to canonical format. Maximum length: 50. (Optional) A31003-O1010-M100-10-76A9, 13/06/2008 3-72 HiPath 8000 - OpenStage Family, Administration Manual...
Page 115
If, for instance, the extensions 3000-5999 are configured in the HiPath 8000, each number will start with 3, 4, or 5. Therefore, the digits to be entered are 3, 4, 5.
Page 116
"Leave as +": All international formatted numbers will be prefixed with "+". Administration via WBM Local functions > Locality > Canonical dial settings Local functions > Locality > Canonical dial A31003-O1010-M100-10-76A9, 13/06/2008 3-74 HiPath 8000 - OpenStage Family, Administration Manual...
International code 1 ... 5: Sequence of "+", local country code, local area code, and local enterprise node corresponding to to one or more phone entries. Example: "+4989722" for Siemens Munich. Administration via WBM Locality > Canonical dial lookup A31003-O1010-M100-10-76A9, 13/06/2008 3-76 HiPath 8000 - OpenStage Family, Administration Manual...
Page 119
|--- Local code 2 |--- International code 2 |--- Local code 3 |--- International code 3 |--- Local code 4 |--- International code 4 |--- Local code 5 --- International code 5 A31003-O1010-M100-10-76A9, 13/06/2008 3-77 HiPath 8000 - OpenStage Family, Administration Manual...
FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-O1010-M100-10-76A9, 13/06/2008 3-79 HiPath 8000 - OpenStage Family, Administration Manual...
Page 122
Administration via Local Phone --- Administration --- File Transfer --- Defaults |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path --- HTTPS base URL A31003-O1010-M100-10-76A9, 13/06/2008 3-80 HiPath 8000 - OpenStage Family, Administration Manual...
FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-O1010-M100-10-76A9, 13/06/2008 3-81 HiPath 8000 - OpenStage Family, Administration Manual...
Page 124
--- File Transfer --- Phone app |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-O1010-M100-10-76A9, 13/06/2008 3-82 HiPath 8000 - OpenStage Family, Administration Manual...
In the administration menu, set the focus to Phone app. --- Administration --- File Transfer --- Phone app Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-O1010-M100-10-76A9, 13/06/2008 3-83 HiPath 8000 - OpenStage Family, Administration Manual...
Server port: Port number of the FTP/HTTPS server in use. Default: 21. • FTP account: Account at the server (if applicable). • FTP username: User name for accessing the server. A31003-O1010-M100-10-76A9, 13/06/2008 3-84 HiPath 8000 - OpenStage Family, Administration Manual...
Page 127
FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-O1010-M100-10-76A9, 13/06/2008 3-85 HiPath 8000 - OpenStage Family, Administration Manual...
Page 128
--- File Transfer --- Hold Music |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-O1010-M100-10-76A9, 13/06/2008 3-86 HiPath 8000 - OpenStage Family, Administration Manual...
In the administration menu, set the focus to Hold Music. --- Administration --- File Transfer --- Hold Music Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-O1010-M100-10-76A9, 13/06/2008 3-87 HiPath 8000 - OpenStage Family, Administration Manual...
FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-O1010-M100-10-76A9, 13/06/2008 3-88 HiPath 8000 - OpenStage Family, Administration Manual...
Page 131
--- File Transfer --- Picture Clip |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-O1010-M100-10-76A9, 13/06/2008 3-89 HiPath 8000 - OpenStage Family, Administration Manual...
In the administration menu, set the focus to Picture clip. --- Administration --- File Transfer --- Picture clip Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-O1010-M100-10-76A9, 13/06/2008 3-90 HiPath 8000 - OpenStage Family, Administration Manual...
FTP path: Path of the directory containing the files. • HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if Download method is switched to "HTTPS". A31003-O1010-M100-10-76A9, 13/06/2008 3-91 HiPath 8000 - OpenStage Family, Administration Manual...
Page 134
--- File Transfer --- LDAP |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-O1010-M100-10-76A9, 13/06/2008 3-92 HiPath 8000 - OpenStage Family, Administration Manual...
In the administration menu, set the focus to LDAP. --- Administration --- File Transfer --- LDAP Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-O1010-M100-10-76A9, 13/06/2008 3-93 HiPath 8000 - OpenStage Family, Administration Manual...
In the administration menu, set the focus to Logo. --- Administration --- File Transfer --- Logo Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-O1010-M100-10-76A9, 13/06/2008 3-96 HiPath 8000 - OpenStage Family, Administration Manual...
Server address: IP address or hostname of the FTP/HTTPS server in use. • Server port: Port number of the FTP/HTTPS server in use. Default: 21. • FTP account: Account at the server (if applicable). A31003-O1010-M100-10-76A9, 13/06/2008 3-97 HiPath 8000 - OpenStage Family, Administration Manual...
Page 140
--- File Transfer --- Screensaver |--- Use default |--- Download method |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-O1010-M100-10-76A9, 13/06/2008 3-98 HiPath 8000 - OpenStage Family, Administration Manual...
In the administration menu, set the focus to Screensaver. --- Administration --- File Transfer --- Screensaver Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-O1010-M100-10-76A9, 13/06/2008 3-99 HiPath 8000 - OpenStage Family, Administration Manual...
If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set- tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec- ified. A31003-O1010-M100-10-76A9, 13/06/2008 3-100 HiPath 8000 - OpenStage Family, Administration Manual...
Page 143
Download method is switched to "HTTPS". Administration via WBM File transfer > Ringer file Administration via Local Phone --- Administration --- File Transfer --- Ringer |--- Use default |--- Download method A31003-O1010-M100-10-76A9, 13/06/2008 3-101 HiPath 8000 - OpenStage Family, Administration Manual...
Page 144
Administration Transferring Phone Software, Application and Media Files |--- Server |--- Port |--- Account |--- Username |--- Password |--- FTP path |--- HTTPS base URL --- Filename A31003-O1010-M100-10-76A9, 13/06/2008 3-102 HiPath 8000 - OpenStage Family, Administration Manual...
In the administration menu, set the focus to Ringer. --- Administration --- File Transfer --- Ringer Press the key. A context menu opens. In the context menu, select Download. The down- load will start immediately. A31003-O1010-M100-10-76A9, 13/06/2008 3-103 HiPath 8000 - OpenStage Family, Administration Manual...
Authentication: Authentication method used for connecting to the LDAP server. value range: "Anonymous", "Simple". Default: "Anonymous". • User name: User name used for authentication with the LDAP server. • Password: Password used for authentication with the LDAP server. A31003-O1010-M100-10-76A9, 13/06/2008 3-104 HiPath 8000 - OpenStage Family, Administration Manual...
Page 147
Administration via Local Phone --- Administration --- Local Functions --- Directory Settings |--- LDAP server address |--- LDAP server port |--- LDAP authentication |--- LDAP user name --- LDAP password A31003-O1010-M100-10-76A9, 13/06/2008 3-105 HiPath 8000 - OpenStage Family, Administration Manual...
Time Transport Protocol). The default port number is 5010. Administration via WBM Network > Port Configuration Administration via Local Phone --- Administration --- Network --- Port Configuration --- RTP base A31003-O1010-M100-10-76A9, 13/06/2008 3-106 HiPath 8000 - OpenStage Family, Administration Manual...
XML trace enabled determines whether debugging information is sent to a special debugging program on the remote server. The relative path for the debugging program is given by the De- bug program name parameter. A31003-O1010-M100-10-76A9, 13/06/2008 3-110 HiPath 8000 - OpenStage Family, Administration Manual...
Page 153
XML trace enabled: Enables or Disables the debugging of the XML application. Value range: "Yes", "No". Default: "No". • Debug program name: The relative path to a special servlet that receives the debug in- formation. A31003-O1010-M100-10-76A9, 13/06/2008 3-111 HiPath 8000 - OpenStage Family, Administration Manual...
Use proxy enables or disables the use of the proxy. If disabled, the phones connects directly to the server. By default, the use of a proxy is disabled. Administration via WBM Applications > XML Applications > Add application A31003-O1010-M100-10-76A9, 13/06/2008 3-113 HiPath 8000 - OpenStage Family, Administration Manual...
An existing application can be modified by changing its parameters. Please ensure to select the desired application before changing the parameters. Administration via WBM Applications > XML applications > Modify application A31003-O1010-M100-10-76A9, 13/06/2008 3-115 HiPath 8000 - OpenStage Family, Administration Manual...
Remove an Existing Application An existing application can be removed. Please ensure to select the desired application before changing the parameters. Administration via WBM Applications > XML applications > Modify application A31003-O1010-M100-10-76A9, 13/06/2008 3-116 HiPath 8000 - OpenStage Family, Administration Manual...
Page 159
--- <Application to be modified> |--- Display name |--- Application name |--- Server address |--- Server port |--- Protocol |--- Program name |--- XML trace enabled --- Debug program name A31003-O1010-M100-10-76A9, 13/06/2008 3-117 HiPath 8000 - OpenStage Family, Administration Manual...
The factory setting is "123456"; it should be changed after the first login. Administration via WBM Authentication > Change Admin password Authentication > Change User password Administration via Local Phone --- Administration --- Password |--- Admin |--- Confirmation |--- User --- Confirmation A31003-O1010-M100-10-76A9, 13/06/2008 3-118 HiPath 8000 - OpenStage Family, Administration Manual...
Press the number keys 2-8-9 simultaneously. The factory reset menu opens. In the input field, enter the special password for factory reset: "124816". Confirm by pressing A31003-O1010-M100-10-76A9, 13/06/2008 3-119 HiPath 8000 - OpenStage Family, Administration Manual...
This function resets all parameters to their factory settings. A special reset password is required for this operation: "124816". Administration via WBM Maintenance > Factory reset Administration via Local Phone --- Administration --- Maintenance --- Factory reset A31003-O1010-M100-10-76A9, 13/06/2008 3-120 HiPath 8000 - OpenStage Family, Administration Manual...
Last restart: Shows date and time of the last reboot. Display on the WBM General information Display on the Local Phone --- Administration --- General Information |--- MAC address |--- Software version --- Last restart A31003-O1010-M100-10-76A9, 13/06/2008 3-121 HiPath 8000 - OpenStage Family, Administration Manual...
|--- WBM URL |--- DNS domain |--- LAN RX |--- LAN TX |--- PC RX |--- PC TX |--- LAN autonegotiated |--- LAN information |--- PC autonegotiated --- PC information A31003-O1010-M100-10-76A9, 13/06/2008 3-122 HiPath 8000 - OpenStage Family, Administration Manual...
The Pre Defined Trace tests provide traceroute tests for a pre-defined selection of servers: DLS, SIP server, and SIP registrar. Traceroute enables traceroute tests for a random IP address. Administration via WBM Diagnostics > Miscellaneous > IP tests A31003-O1010-M100-10-76A9, 13/06/2008 3-123 HiPath 8000 - OpenStage Family, Administration Manual...
100 processes are displayed on the web page. For fur- ther information, please refer to the documentation of the "top" command for Unix/Linux sys- tems. Administration via WBM Diagnostics > Miscellaneous > Memory information A31003-O1010-M100-10-76A9, 13/06/2008 3-124 HiPath 8000 - OpenStage Family, Administration Manual...
The trace file is stored permanent memory. When the file has reached its size limit, it will be saved as old trace file, and the current exception file is emptied for future messages. The old trace file can be viewed here. • Download error file A31003-O1010-M100-10-76A9, 13/06/2008 3-125 HiPath 8000 - OpenStage Family, Administration Manual...
Page 168
Involved in the passing of call related information and signaling to and from the CSTA ser- vice. • Component registrar Handles data relating to the type of phone, e.g. OpenStage 20/40 HFA/SIP, OpenStage 60/ 80 HFA/SIP. • CSTA service A31003-O1010-M100-10-76A9, 13/06/2008 3-126 HiPath 8000 - OpenStage Family, Administration Manual...
Page 169
Mobility service Handles the mobility feature whereby users can log onto different phones and have them configured to their own profile. • OBEX service Involved with Bluetooth accesses to the phone. A31003-O1010-M100-10-76A9, 13/06/2008 3-127 HiPath 8000 - OpenStage Family, Administration Manual...
Page 170
• USB backup service (V1R3.x upwards) Used to make backup/restore to/from USB stick by using password. This item is available in the phone GUI. • vCard parser service (V1R3.x upwards) A31003-O1010-M100-10-76A9, 13/06/2008 3-128 HiPath 8000 - OpenStage Family, Administration Manual...
Page 171
Provides authentication to devices attached to a LAN port, establishing a point-to-point connection or preventing access from that port if authentication fails. The service is used for certain closed wireless access points, A31003-O1010-M100-10-76A9, 13/06/2008 3-129 HiPath 8000 - OpenStage Family, Administration Manual...
> changing the level for the tracing of SIP messages, the phone must be rebooted. 3.17.6.4 Call Log Administration via WBM Diagnostics > Easy Trace Profiles > Call log problems A31003-O1010-M100-10-76A9, 13/06/2008 3-132 HiPath 8000 - OpenStage Family, Administration Manual...
Maximum jitter (milliseconds): When the jitter exceeds this value, a report is generated. Default: 20. • Average round trip delay (milliseconds): When the average round trip time exceeds this value, a report is generated. Default: 100. A31003-O1010-M100-10-76A9, 13/06/2008 3-140 HiPath 8000 - OpenStage Family, Administration Manual...
Page 183
Value range: "Yes", "No". Default: "No". The transmission of report data can be triggered manually by pressing Send now in the local menu. Administration via WBM Diagnostics > QoS Reports > Generation A31003-O1010-M100-10-76A9, 13/06/2008 3-141 HiPath 8000 - OpenStage Family, Administration Manual...
Codec: Number of the Payload Type applied in the session; see RFC 3551 (Table 4 and 5). • Maximum packet size: Maximum size (in ms) of packets received during the report inter- val. A31003-O1010-M100-10-76A9, 13/06/2008 3-143 HiPath 8000 - OpenStage Family, Administration Manual...
Page 186
Periods with at least one threshold exceeded: Number of observation intervals with at least one threshold exceedance. If there is no data, the value is 255. The threshold values included are: A31003-O1010-M100-10-76A9, 13/06/2008 3-144 HiPath 8000 - OpenStage Family, Administration Manual...
Page 187
3: E.164 number of the local phone. • Subscriber number: Subscriber number of the local phone. • Call ID: SIP call id. • MAC address: MAC address of the local phone. A31003-O1010-M100-10-76A9, 13/06/2008 3-145 HiPath 8000 - OpenStage Family, Administration Manual...
Page 188
Administration Diagnostics Data viewing via WBM: Diagnostics > QoS reports > View Session Data A31003-O1010-M100-10-76A9, 13/06/2008 3-146 HiPath 8000 - OpenStage Family, Administration Manual...
3.17.10 Test Interface This parameters enables or disables the test interface (HPT). Administration via WBM Maintenance > Test interface Administration via Local Phone --- Administration --- Maintenance --- Disable HPT A31003-O1010-M100-10-76A9, 13/06/2008 3-148 HiPath 8000 - OpenStage Family, Administration Manual...
V1R3.x and upwards: System > Features > Feature access > Services V1R4.x and upwards: System > Features > Configuration Administration via Local Phone In V1R2.x, only enabling or disabling Bluetooth is possible via the local admin menu: --- Administration A31003-O1010-M100-10-76A9, 13/06/2008 3-149 HiPath 8000 - OpenStage Family, Administration Manual...
Page 192
In V1R3.x and upwards, only the device address can be viewed via the local admin menu: --- Administration --- System --- Features --- Configuration --- Bluetooth --- Local device address A31003-O1010-M100-10-76A9, 13/06/2008 3-150 HiPath 8000 - OpenStage Family, Administration Manual...
Set of numbers to access emergency ser- vices. Initial extension digits 2, 3, 4, 5, 6, 8 digits of numbers that are used for extensi- on numbers on the local node. Tabelle 4-1 A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
International code <2> +4989722 Equivalent prefix to access numbers on this node from the PSTN. Here, the prefix used by the PSTN for direct inward dialing is identical to the enterprise node prefix. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Dial string sent when Internal numbers = Local enterprise form 2345 dialing from the Internal numbers = Always add node 7802345 phone book Internal numbers = Use external numbers 9432345 A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 196
Dial string sent when External numbers = Local public form 234567 dialing from the External numbers = National public form 011511234567 phone book External numbers = International form 004411511234567 A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Adobe Photoshop Example: Save the Image Finally, save the image in BMP format. You can now upload the logo file to the phone as described in Section 3.10.7, “Logo”. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
The background color on WP4 - skin 1 is a gradient; the colour listed here is an average value. Adobe Photoshop: Click on the Background Color icon on the Color palette group, then type the color code without leading "#" into the # field) A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 199
Merge the two layers to one. Adobe Photoshop: In the Panel, select both the background layer and the new layer containing the inserted logo. Afterwards, go to Layer in the Menu bar, and select Merge Layers. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 200
Magic Eraser Tool. After this, got to the Menu bar and set the Tolerance field to "0". Save the Image Finally, save the image in PNG format. You can now upload the logo file to the phone as described in Section 3.10.7, “Logo”. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
+1<area code><call number>. However, in a standard configura- tion, the HiPath 8000 will not handle this dial string correctly, due to the +1 prefix. There- fore, it is recommended to use the ipPhone field, which is typically unused in Active Direc- tory.
In the LDAP template, the fields are represented by hard-coded names: ATTRIB01, ATTRIB02, and so on. These field names are assigned to LDAP attributes, as appropriate. A31003-O1010-M100-10-76A9, 13/06/2008 4-10 HiPath 8000 - OpenStage Family, Administration Manual...
Page 203
Given "example.com" as the LDAP subtree to be searched, the LDAP template file would look like this: OpenStage LDAP TEMPLATE (v.1) SEARCHBASE="dc=example,dc=com" ATTRIB01="sn" ATTRIB02="givenname" ATTRIB03="telephoneNumber" ATTRIB04="facsimileTelephoneNumber" ATTRIB05="mobile" ATTRIB06="homePhone" ATTRIB07="o" ATTRIB08="departmentNumber" ATTRIB09="" ATTRIB10="title" ATTRIB11="mail" A31003-O1010-M100-10-76A9, 13/06/2008 4-11 HiPath 8000 - OpenStage Family, Administration Manual...
Page 204
Given "example.com" as the LDAP subtree to be searched, the LDAP template file would look like this: OpenStage LDAP TEMPLATE (v.1) SEARCHBASE="dc=example,dc=com" ATTRIB01="sn" ATTRIB02="givenname" ATTRIB03="ipPhone" ATTRIB04="otherTelephone" ATTRIB05="mobile" ATTRIB06="homePhone" ATTRIB07="company" ATTRIB08="department" ATTRIB09="" ATTRIB10="title" ATTRIB11="mail" A31003-O1010-M100-10-76A9, 13/06/2008 4-12 HiPath 8000 - OpenStage Family, Administration Manual...
Upload the file using the WBM (see Section 3.10.6, “LDAP Template”), or, alternatively, the Local menu, or the DLS (see the Deployment Service Administration Manual). For an ex- ample configuration, see the following WBM screenshot (path: File transfer > LDAP): A31003-O1010-M100-10-76A9, 13/06/2008 4-13 HiPath 8000 - OpenStage Family, Administration Manual...
TouchGuide. In the context menu, select Find by pressing In the query mask, select the entry to be searched, for instance Last Name. Press open the onscreen keypad for text input. A31003-O1010-M100-10-76A9, 13/06/2008 4-14 HiPath 8000 - OpenStage Family, Administration Manual...
Page 207
3.1, “Access via Local Phone”, step 5. Navigate to the Find option and press . If the query was successful, at least one entry will be listed in the following manner: A31003-O1010-M100-10-76A9, 13/06/2008 4-15 HiPath 8000 - OpenStage Family, Administration Manual...
Page 208
• Dial the Mobile number. • Have the entry’s details, that is, all attributes displayed. • Start a new search. • Clear the list of search results. <SCREENSHOT context menu> A31003-O1010-M100-10-76A9, 13/06/2008 4-16 HiPath 8000 - OpenStage Family, Administration Manual...
Page 245
-> Section 3.12.3 --- Disable loudspeech -> Section 3.12.3 |--- General Information |--- MAC address -> Section 3.17.1 |--- Software version -> Section 3.17.1 |--- Last restart -> Section 3.17.1 |--- Password A31003-O1010-M100-10-76A9, 13/06/2008 5-37 HiPath 8000 - OpenStage Family, Administration Manual...
Page 246
OpenStage 60/80 V1R2.x only. In V1R3.x, Bluetooth can be enabled or disabled only via WBM or DLS. OpenStage 60/80 only. V1R3.x upwards only. OpenStage 40/60/80 only. V1R4.x upwards. Not available yet. A31003-O1010-M100-10-76A9, 13/06/2008 5-38 HiPath 8000 - OpenStage Family, Administration Manual...
Differentiated Services. Specifies a layer 3 mechanism for classifying and managing net- work traffic and providing quality of service (->QoS) guarantees on ->IP networks. DiffServ can be used to provide low-latency, guaranteed service for e. g. voice or video communi- cation. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 248
The standard bitrate is 8 kBit/s. Music or tones such as ->DTMF or fax tones cannot be transported reliably with this codec. Gateway Mediation components between two different network types, e. g., ->IP network and ISDN network. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 249
Liquid Crystal Display. Display of numbers, text or graphics with the help of liquid crystal technology. LDAP Lightweight Directory Access Protocol. Simplified protocol for accessing standardized di- rectory systems, e.g., a company telephone directory. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 250
Ports are used in ->IP networks to permit several communication connections simulta- neously. Different services often have different port numbers. PSTN Public Switched Telephone Network. The network of the world's public circuit-switched telephone networks. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 251
Session Description Protocol. Describes and initiates multimedia sessions, like web con- ferences. The informations provided by SDP can be processed by ->SIP. Session Initiation Protocol. Signaling protocol for initialising and controlling sessions, used e. g. for ->VoIP calls. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 252
Uniform Resource Locator. A special type of ->URI which provides means of acting upon or obtaining a representation of the resource by describing its primary access mechanism or network location. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 253
->WAP-browser. Wireless Session Protocol. The protocol is a part of the ->WAP specification. Its task is to establish a session between the terminal device and the WAP gateway. A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 254
Glossary Nur für den internen Gebrauch A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
External Numbers 3-73 Local Enterprise Number 3-72 Local National Code (Local Area Code) 3-72 Logo (Create) 4-5 FTP Settings 3-79 Logo (Download) 3-94 Function Keys 1-4, 1-5, 1-6 MAC Address 6-4 A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 257
OperaAdminSIX.fm Index Nur für den internen Gebrauch A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 258
OperaAdminSIX.fm Index Nur für den internen Gebrauch A31003-O1010-M100-10-76A9, 13/06/2008 HiPath 8000 - OpenStage Family, Administration Manual...
Page 260
Subject to availability. Right of modificati- Siemens Enterprise Communications on reserved. The trademarks used are owned by www.siemens.com/open Siemens Enterprise Communications GmbH & Co. KG or their respective owners.