Port Numbering - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Extended Administration

Port Numbering

The phone will provide the ability to configure any TCP or UDP port number
that is currently fixed, with the exception of:
•
•
•
•
•
The table below gives the port addresses that will be configurable. The ta-
ble also shows the default values (see also
bers).
In some cases a port base number is used. The port base number will be
the configurable item, not the port numbers derived from the port number
base.
Function
RTP port range (local)
RTP port range (remote)
RTCP port range (local)
RTCP port range (remote)
HTTP - Hypertext Transfer Protocol
HTTPS – Secure Hypertext Transfer Protocol
SNMP
SNMP Traps
SNTP
SNTP Heart-beat
DNS
DHCP Server port
82
SNMP
SNTP
DNS
WAP Push
WAP Push secure.
RFC 1700
Default Default Value
Value TCP
UDP
5004 to
5006
any
5005 to
5007
any
8085
443
161
162
123
580
53
67
– Assigned num-
Comment
RTP port number is
even. RTCP port num-
ber is (RTP port num-
ber)+1.
5004 to 5006
reserved by IANA but
can be used by the
phone.
RTP port number is
even. RTCP port num-
ber is (RTP port num-
ber)+1.
5005 to 5007 reserved
by IANA but can be
used by the phone.
Not configurable
Not configurable
Not configurable
Not configurable
Default BOOTP port
numbers. Not config-
urable