Terminal Number; Terminating Line Preference - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Alphabetical Reference

Terminal number

•
•
•
•

Terminating line preference

Terminating Line selection – provides connection of the phone to one of
the lines appearing on it, on an automatic basis when calls are alerting or
ringing (audible) and the user goes off-hook. There are five terminating op-
tions.
A Keyset is assigned one of the following preferences.
•
•
•
•
•
Select the according terminating line preference:
See also Originating line preference on
224
The phone will send REGISTER messages containing the contents of
this parameter, but only when the Register by Name field
is set to "Off" and the SIP Routing field
Whether this parameter is used, depends on the configuration of the
registrar server.
Value range table:
Permitted values
Length min.
Length max.
Editing by phone: Number Editor
page 61 page 115
Ringing Line Preference – A line in the ringing state is selected for ter-
minating calls. In the case of multiple lines, lines shall be selected on a
first-in, first-out basis.
Ringing Line Preference with prime line preferred – Same as Ring-
ing Line Preference, but if the prime line is ringing at any time it is sig-
naled and selected before calls on secondary lines.
Incoming Line Preference – In the case of multiple lines alerting or
ringing on a device, an incoming line is selected based on its ringing as-
signment. Ringing lines are selected on a first-in, first-out basis first,
then alerting (visual only) lines are selected on a first-in, first-out basis.
Incoming Line Preference with prime line preferred – Same as In-
coming Line Preference, but if the prime line is ringing at any time it is
signaled and selected before calls on secondary lines. Prime line must
have ringing arrangement.
No (Terminating) Line Preference – A line key must be pre-selected
or post-selected each time the user elects to answer a call.
– Ringing
– Incoming
– Incoming PLP
– Ringing PLP
– None
page 69 page 123
page 216 is set to "Server".
numeric
1 digit
20 digits
page 157.
page 204.
page 210