Administration Interfaces; Phone Menu; Web Interface - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Administration Interfaces

You can configure the optiPoint 410/420 by using any of the following
methods.

Phone Menu

For direct configuration of an optiPoint 410/420 entry economy/
economy plus/standard/advance S V7 .0. Access to the phone is required.
The dialling-keypad, the two-line display and the handset of the phone sup-
ports you in72
configuring the optiPoint 410/420.
Menu overview see
As long as the IP connection is not properly configured, you have
to use this methode to setup the phone.

Web Interface

For remote configuration of individual IP phones in your network. Direct ac-
cess to the phone is not required.
Menu overview see
To use this method, the phone must first obtain IP connectivity.
The remote configuration is not applicable while the phone is not
in idle mode.
page 148.
page 110.
Administration Interfaces
47